H35-211_V2.5 test tips - Latest Training Dumps

H35-211_V2.5 Exam Brain Dumps – Study Notes and Theory [Apr-2022]

100% Guaranteed Results H35-211_V2.5 Unlimited 66 Questions

NO.36 (Radio) When using the siP protocol, you need to use a local number graph for matching, if you use the default
matching mode to match a 7-digit number beginning with 7727, then the following options are available?
The figure is

Local-bitmap add huawei normal 7727xxx/7726.

Local-digi tmap add huawei normal 772. /7727xxx

Local-di gi tmap add huawei normal 7727

Local-digitmap add huawei normal 7727xxx/7727

NO.37 The scope of protection of the (multiple choice) GPON Type B dual attribution protection includes

Primary and standby OLTs

Primary and standby primary thousand fibers

OlT’s primary and standby PON should be ports

Primary and standby branch fibers

NO.38 When ont fails or the hardware needs to be replaced, the ONT service needs to be replaced, and then the ONT
service needs to be removed on the OLT, and then the new ONT service needs to be registered

wrong

Right

NO.39 Max-Forwards fields can be used in S1P messages to solve loop problems and avoid endless packet
forwarding.

wrong

Right

NO.40 When configuring IPTV services on the U2000, what templates are included in the IGMP templates?

Permission templates

Multicast user templates

Program templates

Preview the parameter template

NO.41 The maximum spectroscopic ratio supported by 10G EPON is?

1: 256 (Laboratory).

1:32

1:128

1:64

NO.42 (Radio) In the ACL, if you need to filter the packet according to the source IP address information, destination
IP address information, port number and other information of the packet, then the acl number template created
is

5000~5999

3000~3999

20002999

4000~4999

NO.43 The Class D multicast address range is from 224. 0 0 0 to 238. 255 255 255

True

False

NO.44 Under the H.248 protocol, if the signaling IP and media IP are both 10. 1 1 100/8, voice gateway is 10. 1 1 1.
When configuring voIP service, the following command is incorrect

Using the command ip address media10 in voip mode. 1 1 10010 1 1 1 Configure the media IP

Use the reset coldstart command under Voice Interface to make the interface property configuration take
effect

Use the if-h248 attributei command to configure interface properties under the voice interface

Using the command ip address signaling10 in voip mode. 1 1 10010 1 1 1 Configure the signaling IP

NO.45 The complete SIP message interaction process will contain multiple request and response messages, and the
sIP message header field can be used to describe what the specific solution corresponding to the current
response message is

Csea

CaLL-ID

First line

Message body

NO.46 (Radio) When configuring multicast services on MA5600T/MA5680T, the programs of multicast VLANs are
statically configured, and which of the following options must be configured, otherwise the multicast
programs may not be able to be watched

igmp profile

igmp program

igmp priority

igmp preview

NO.47 (Single) A total of 100 multicast users on OLT are watching 20 multicast programs, assuming that each
multicast program occupies 2M bandwidth, then how much multicast traffic is currently on the OLT upstream
port

200M

100M

40M

50M

NO.48 (Multi-select) esight is a network management software positioned in the enterprise network scenario, which
can view the details of onu devices, including the following information?

UNT port information

speed

Optical module temperature

The optical module transmits power

NO.49 (Radio) The following options, regarding the description of the H.248 connection model, are correct?

The connection model cannot be modified during a user session

When the session between the two users ends, the corresponding association is used

A media gateway that supports only point-to-point connections can allow three or more endpoints to
exist in the –association at the same time

When the user call is successful, the empty connection starts to be created

NO.50 (Single)When deploying home and guest services in a PON system, which of the following services has the
highest priority?

VOIP

GAME

INTERNET

IPTV

NO.51 (Single-choice) An IPTV user reflects that the TV cannot be watched, open the debug switch on the OLT side,
and the debug printing information is as follows: huawei( config).
This can be judged by the results of the query

The poN port multicast bandwidth is insufficient

The user does not have permission to watch the show

IGMP Sakamoto Fussel

User bandwidth validation failed

NO.52 (Single-choice) HSI service uses VLAM tags to bind users precisely, if there are 5K FTTH hanging under the
LT Users, which VLAN switching scheme is recommended?

User VLAN->C’VLAN->S+CVLAN

S+C>S+C

c>S

C>S+C

NO.53 (Radio) When the invitation message sent by user A reaches user B after passing through server C, D, E, the
message received by user B is VIA. The server address of the field information record is in descending order.

C->D->E

E->C->D

E->D->C

C-E->D

NO.54 The (radio) device periodically sends and receives LMCP packets to avoid information loss, and if packets are
not received during ( ) LACp packet interaction cycles, the system considers the port to be down

NO.55 (Radio) Which of the following options can improve the service experience of multicast users when switching
channels (switching time is shorter)

When adding a multicast program, the prejoin feature is disabled

Enables the Quick Leave feature when adding a multicast user

When you add a multicast user, enable the preview feature

Use group addresses with small values

NO.56 (Single choice) The following statement about the PITP protocol is incorrect

The PITP protocol includes pitp P mode and PITP V mode

The purpose of the PITP feature is to provide the upper authentication server with the physical location
information of the access user, and the BRAS device can realize the user account and the press position
after obtaining the user access location information

Bind the authentication of the information to avoid the theft and roaming of the user account

In pitp V mode, the user’s physical location information is added to the PPPOE message sent by the user
side to cooperate with the upper-level server for user authentication

PITP P mode can also be called PPOE+ mode

NO.57 In the evolution of EPON to 10 G EPON, a smooth transition is achieved at the local level by adding WDM
WDM modules, and ODNs coexist

True

False

NO.58 The auto-discovery methods provided by sight are by network segment mode, ARP mode and routing mode.
At the same time, you can create a network segment or IP address of a device that does not need to be
connected as an exclusion list. Automatically skips the network segment or IP address configured in the
exclusion list during self-discovery of devices.

True

False

H35-211_V2.5 Dumps PDF – Want To Pass H35-211_V2.5 Fast: https://www.trainingdump.com/Huawei/H35-211_V2.5-practice-exam-dumps.html

Tag H35-211_V2.5 test tips

[Q36-Q58] H35-211_V2.5 Exam Brain Dumps – Study Notes and Theory [Apr-2022]