Category API-1169

Q51. Negative buoyancy requirements prevent

Q52. A hazardous atmosphere means?

Q53. All pipe installed off shore , under water not more than 200 ft (60) meters deep but less than 12 ft must have ______ in cover of rock. (except in the Gulf of Mexico and its inlets)

Q54. All pipe installed in navigable river, stream or harbor must be installed with a min of __________ in of rock cover.
49 CFR 192.327

Q55. Under the third canon, “Provide diligent and competent service to principals,” a land surveyor or professional engineer must stay informed about relevant regulations. Which of the following refers to the permit program that addresses water pollution by regulating point sources that discharge pollutants into waters of the United States?

Q56. When a ditch for a pipeline is filled, it must be done so that it provides what for the pipeline?

Q57. During pressure testing, what must the testing supervisor review with test inspector, chief, and other personnel to be certain that all equipment is adequate?

Q58. Flammable Liquids

Q59. Field beveling of pipe ends by manual oxygen cutting is or is not acceptable if authorized by the company?

Q60. Prior to hydrostatic testing the owner/operator shall notify?

Q61. When non-destructive testing is required under 192.241(b), the following percentages of each day,s field butt welds, selected at random by the operator must be nondestructively tested:
-In class 1 locations?
-In class 2 locations?
Standard?

Q62. Class _____ explosives – Includes certain types of manufactured articles which contain Class A or Class B explosives or both as components but in restricted quantities.

Q63. CERCLA purpose

Q64. Identifying _______________ needs in all areas is a responsibility of the environmental inspector.

Q65. Lacerations from shavings, burns from hot shavings and eye injuries from shavings are hazards of what activity?

Q66. _______________ Must be worn by personnel near arc welding and arc cutting with open arcs.

Q67. Granular cohesionless soils such as angular gravel, silt, silt loam, sandy loam and silty clay loam and sandy clay loam.

Q68. Define Quality Assurance, and who is expected to be the principal means of assuring work and material quality during field construction?

Q69. If pipe has a longitudinal weld the bend must be located in the ___________

Q70. Define limits placed on characteristics of materials, products, and services established by the organization to achieve conformity to the manufacturing or service requirements is the definition of?

Q71. Liquid petroleum that is being considered as a pressure test medium will have a Reid vapor pressure of?

Q72. All compressed gas cylinders and tanks should be stored with ______________ in place when not in used.

Q73. Soil that remains in clumps