NSE6_OTS_AR-7.6 - Latest Training Dumps

Use Fortinet NSE6_OTS_AR-7.6 Dumps To Succeed Instantly in NSE6_OTS_AR-7.6 Exam

Ultimate Guide to NSE6_OTS_AR-7.6 Dumps – Enhance Your Future Career Now

Fortinet NSE6_OTS_AR-7.6 Exam Syllabus Topics:

Topic	Details
Topic 1	Network access control: Focuses on OT Ethernet fundamentals and designing secure network segmentation strategies. It also includes configuring authentication methods to control and verify access to the OT network.
Topic 2	Network security: Explains how to apply security inspections specifically for industrial protocols and implement virtual patching to protect vulnerable systems. It also includes configuring automation to enhance threat response and operational efficiency.
Topic 3	Monitoring and risk assessment: Covers creating event handlers in FortiAnalyzer to monitor network activity and detect threats. It also includes performing risk assessments and analyzing security reports to support ongoing risk management.
Topic 4	Asset management: Covers understanding OT standards and how Fortinet aligns with compliance requirements in industrial environments. It also includes using the Fortinet Security Fabric to manage assets and implementing device detection using FortiGate and FortiNAC.

QUESTION 41
Refer to the exhibit.

An automation trigger creation wizard is shown. You want to automate some tasks in your OT network. In a FortiGate device, you create a new automation trigger based on a FortiAnalyzer event handler. When you want to configure the Event handler name field, the event handler created in FortiAnalyzer is not shown.
What are two reasons for this? (Choose two answers)

You must configure the Fabric settings on the FortiGate device.

You must enable Automation Stitch in the event handler on FortiAnalyzer.

You must click + Create in the Event handler name field.

You must add the FortiGate device to FortiAnalyzer and authorize it.

QUESTION 42
An OT administrator has configured FSSO and local firewall authentication. A user who is part of a user group is not prompted for credentials during authentication.
What is a possible reason?

FortiGate determined the user by passive authentication

The user was determined by Security Fabric

Two-factor authentication is not configured with RADIUS authentication method

FortiNAC determined the user by DHCP fingerprint method

QUESTION 43
Refer to the exhibits. Which statement is true about the traffic passing through to PLC-2?

IPS must be enabled to inspect application signatures.

The application filter overrides the default action of some IEC 104 signatures.

IEC 104 signatures are all allowed except the C.BO.NA 1 signature.

SSL Inspection must be set to deep-inspection to correctly apply application control.

QUESTION 44
As the first step in your OT network protection plan, you must identify the OT protocols that the FortiGate device supports. Which two configurations must you implement on this FortiGate device? (Choose two answers)

You must enable Device detection on all the interfaces.

You must implement an Application Control security profile that monitors OT.

You must enable the OT signatures.

You must implement an Intrusion Prevention security profile that monitors OT.

QUESTION 45
You want to improve access control for your large OT network using passive authentication. What must you configure on FortiGate?

Two-factor authentication

Fortinet Single-Sign On (FSSO)

A FortiAuthenticator device as a remote server

Local users

QUESTION 46
Refer to the exhibit.

A partial OT network is shown.
You want to enforce access control from Engineering Workstation to PLC.
How can you achieve this on FortiGate?

You must create forward domain IDs.

You must set the software switch to implicit.

You must add authentication in the corresponding firewall policy.

You must create VDOMs.

QUESTION 47
A supervisor is configuring a software switch on a FortiGate device. What must the supervisor configure on FortiGate to control the traffic between member interfaces on the software switch, using firewall policies?

The supervisor must add different VLAN interfaces to the software switch.

The supervisor must configure the software switch with at least one wireless interface and one VLAN interface.

The supervisor must configure a separate forward domain for the software switch.

The supervisor must configure intra-switch-policy to explicit.

QUESTION 48
Refer to the exhibit.

A FortiAnalyzer report is shown.
You must extract relevant information provided by the report regarding your OT network.
Which two statements are correct? (Choose two.)

The report covers the last day.

The attacks are blocked.

Mobdus traffic is reported.

The targeted IP address of the attacks is 10.1.5.1.

QUESTION 49
Refer to the exhibit. An OT network architect must implement inter-VLAN routing in the topology.
Traffic from each client is tagged with a unique VLAN. Each client is directly connected to a Layer
2 switch.
Which action must the OT network architect take to achieve this goal?

Make FortiGate a router on a stick.

Set the same forward domain on each switch interface.

Configure a software switch to handle traffic for each client.

Replace the switch with a Layer 3 device.

QUESTION 50
As an OT administrator, it is important to understand how industrial protocols work in an OT network. Which communication method is used by the Modbus protocol?

It uses OSI Layer 2 and the primary device sends data based on request from secondary device.

It uses OSI Layer 2 and both the primary/secondary devices always send data during the communication.

It uses OSI Layer 2 and both the primary/secondary devices send data based on a matching token ring.

It uses OSI Layer 2 and the secondary device sends data based on request from primary device.

QUESTION 51
In the Purdue model, at which level are physical assets like the Industrial Internet of Things (IIoT) placed?

At Level 5 only

At Level 1 only

Above Level 4

Below Level 3.5

QUESTION 52
Refer to the exhibit. Based on the topology designed by the OT architect, which two statements about implementing OT security are true? (Choose two.)

Firewall policies should be configured on FortiGate-3 and FortiGate-4 with industrial protocol sensors.

Micro-segmentation can be achieved only by replacing FortiGate-3 and FortiGate-4 with a pair of FortiSwitch devices.

IT and OT networks are separated by segmentation.

FortiGate-3 and FortiGate-4 devices must be in a transparent mode.

QUESTION 53
Refer to the exhibit.

A partial OT network is shown.
You have configured the FortiGate device with VLANs to segment the OT network. The supervisor now wants to connect to the PLC from the Engineering Workstation.
How can you allow access from the Engineering Workstation to the PLC?

You must configure intra-switch-policy as explicit.

You must configure intra-switch-policy as implicit.

You must configure forward domain IDs.

You must configure a layer 3 switch.

QUESTION 54
Drag and Drop Question
Match each industrial protocol to its corresponding characteristics.
Select each OT industrial protocol in the column on the left and drag and drop it into the blank space next to its corresponding characteristics in the column on the right. After matching a device type to its characteristics, you can move it again if you want to change your answer by clicking the industrial protocol name. You must match all four industrial protocols to their characteristics in the work area.

QUESTION 55
Refer to the exhibit.

You have configured event handlers on FortiAnalyzer to monitor your OT network.
Based on the partial Event Monitor page shown in the exhibit, which statement is correct?

The corresponding IPS log has a block or drop action.

The Web.Client event is contained.

The Web.Client event is unhandled.

The corresponding IPS log has a quarantine action.

QUESTION 56
Refer to the exhibit.

A partial Application Sensor profile is shown. When you apply this profile in a firewall policy, which two statements are correct? (Choose two answers)

A log is provided for each IEC command.

A log is provided for each Modbus command.

OT signatures are enabled.

All OT protocols are blocked.

QUESTION 57
Refer to the exhibit. A Security Fabric logical topology view is shown. Which two statements are correct? (Choose two.)

Edge-FortiGate, FortiGate-1, and FortiGate-2 have the Security Fabric configured.

Device detection is enabled on port5 of the Edge-FortiGate device.

FortiAnalyzer is connected only to Edge-FortiGate.

FortiAnalyzer has the Security Fabric configured.

QUESTION 58
Which three criteria can a FortiGate device use to look for a matching firewall policy to process traffic? (Choose three.)

Services defined in the firewall policy.

Source defined as internet services in the firewall policy

Lowest to highest policy ID number

Destination defined as internet services in the firewall policy

Highest to lowest priority defined in the firewall policy

QUESTION 59
Refer to the exhibit.

A Virtual Patching profile is shown. You have recently updated your SCADA system and would like to apply the SCADA virtual patching profile. Which two statements about this profile are correct? (Choose two answers)

Only the vulnerability Schneider.Electric.ClearSCADA.HTTP.Interface.XSS is still present.

Low severity signatures are not blocked for the device with the MAC address 12:12:12:12:12.

This profile blocks critical severity signatures for all the devices.

The device with the MAC address 11:11:11:11:11 is considered to have no vulnerabilities.

QUESTION 60
Refer to the exhibit.

Which statement about this partial Asset Identity List page is correct? (Choose one answer)

A firewall policy has an Antivirus security profile applied to it.

A firewall policy has a Virtual Patching security profile applied to it.

A firewall policy has an Intrusion Prevention security profile applied to it.

A firewall policy has an Application Control security profile applied to it.

Fortinet Dumps – Learn How To Deal With The Exam Anxiety: https://www.trainingdump.com/Fortinet/NSE6_OTS_AR-7.6-practice-exam-dumps.html

Category NSE6_OTS_AR-7.6

Use Fortinet NSE6_OTS_AR-7.6 Dumps To Succeed Instantly in NSE6_OTS_AR-7.6 Exam [Q41-Q60]

Fortinet NSE6_OTS_AR-7.6 Exam Syllabus Topics: