Steps Necessary To Pass The MB-330 Exam from Training Expert TrainingDump [Q35-Q55]

Rate this post

Steps Necessary To Pass The MB-330 Exam from Training Expert TrainingDump

Valid Way To Pass Microsoft Dynamics 365’s MB-330 Exam

Microsoft MB-330 Exam Syllabus Topics:

Section	Objectives
Topic 1: Manage Production and Planning	– Production control 1. Production orders and scheduling 2. Resource and capacity management – Master planning 1. Demand forecasting and planning 2. Supply planning and MRP
Topic 2: Manage Inventory and Logistics	– Inventory management 1. Inventory adjustments and transfers 2. Inventory tracking and costing – Transportation management 1. Freight and shipment planning 2. Carrier and route setup – Warehouse management 1. Inbound and outbound warehouse processes 2. Wave and location directives
Topic 3: Implement Sales and Order Management	– Returns and customer service 1. Return order processing 2. Customer service workflows – Sales order processing 1. Order capture and fulfillment 2. Pricing and discounts
Topic 4: Implement Procurement and Sourcing	– Procurement processes 1. Purchase agreements and pricing 2. Vendor management and purchase orders – Sourcing and vendor collaboration 1. Vendor collaboration portals 2. Approval workflows
Topic 5: Configure Dynamics 365 Supply Chain Management	– Configure supply chain management parameters 1. Configure warehouse and inventory parameters 2. Set up procurement and sourcing parameters – Set up organization and master data 1. Configure legal entities and organizational structures 2. Configure products and inventory dimensions

Q35. A company uses Dynamics 365 Supply Chain Management. The company has multiple shrink wrap machines on the shipping dock.
An older shrink wrap machine has a unique vibration. The older machine must be inspected frequently and measured against the vibration and performance of other machines.
You need to configure the following requirements for the aging shrink wrap machine:
* Inspect the older machine frequently.
* Measure results against other machines.
What should you configure for each requirement? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Q36. A company uses Dynamics 365 Supply Chain Management. Inventory is valued through FIFO costing.
The warehouse manager identifies item discrepancies and increases quantities in a counting journal. Finance then discovers that the cost on ItemA posted as zero dollars on the journal transaction.
You need to configure the system to ensure that the cost is populated on the transaction.
What should you configure? To answer, select the appropriate options in the answer area, NOTE: Each correct selection is worth one point.

Q37. A distribution company uses Dynamics 365 Supply Chain Management.
A high-volume warehouse for the distribution company automatically releases transfer order lines to the warehouse throughout the day.
Order line quantities are frequently changed after release to the warehouse. However, the load lines are not always updated.
You need to configure automatic updates to the load lines.
What should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Q38. You are implementing Dynamics 365 Supply Chain Management.
A user reports that some of the quarantine statuses appear to mean the same thing.
You need to explain the status of quarantine orders by the location of the item.
What is the status of the orders based on the location of the item? To answer, drag the appropriate statuses to the correct steps. Each status may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

Q39. An airport uses Dynamics 365 for Finance and Operations. You purchase new baggage-sorting hardware.
You must add both the hardware and the service contract for the hardware to the product hierarchy.
You need to configure the category node.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Q40. You need to configure the system to support regional sales requirements.
Which group assignments should you use? To answer, select the appropriate options in the answer area.
NOTE. Each correct selection is worth one point.

Q41. A company sells vehicles and performs multiple quality checks on them while in production.
The company receives a customer complaint about a 2019 vehicle that has leaks around the windows and door seals.
You need to block inventory on these vehicles and perform quality tests to ensure that there are no leaks.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Q42. An energy sustainability company uses Dynamics 365 Supply Chain Management.
The company sells raw materials to contractors working on a pipeline project by using special pricing. The company plans to sell raw materials to non-pipeline contractors; however, those sales will not be eligible for the special pricing, any discounts, or price breaks. The non-pipeline contractor pricing may change over time.
The price history must be retained.
You need to configure the system for the pricing requirements.
What should you configure? To answer, drag the appropriate configurations to the correct pricings. Each configuration may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

Q43. A company sells a new product line. Buyers purchase a large shipment into the distribution center.
The product must be divided among the retail stores equally.
You need to configure buyer push functionality.
Which configuration options should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Q44. New order items arrive from vendors and come into a company’s main warehouse.
You must set up internal transportation processes in Dynamics 365 for Finance and Operations to distribute goods to other locations.
You need to set up inbound orders through transportation management.
In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order.
NOTE: More than one order of answer choices is correct. You will receive credit for any of the correct orders you select.

Q45. A company uses Dynamics 365 Supply Chain Management with advanced warehouse capabilities.
Warehouse workers use mobile devices. High value stocked items are classified as A items and are stocked in different locations in the warehouse.
The accounting department requires that all A items be counted weekly. If there are any inconsistencies, the A items must be counted a second time prior to posting the counts.
You need to configure the system to meet the requirements
What should you configure for each requirement? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Q46. A company uses Dynamics 365 Supply Chain Management. The company purchased a high-tech machine that cuts production time in half compared to existing machines.
The new machine must be serviced after 200 finished goods are produced. Downtime for the new machine will impact production and must be planned in advance so the production lead times are adjusted The service technicians must always prioritize the new machine repairs over any other repairs.
You need to configure the new machine to prioritize servicing over other repairs.
What should you configure for each requirement? To answer, drag the appropriate configurations to the correct requirements. Each configuration may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content NOTE Each correct selection is worth one point

Q47. A company creates a new bill of materials (BOMs). The company subcontracts with a vendor to manufacture one component for the BOM.
You need to ensure that only the production manager is permitted to approve BOMs.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

Assign security permissions to approve the BOM version but not the related BOM.

Assign security permissions to the user for the approval form.

Assign security permissions to the Vendor portal.

Set up the approver as a vendor.

Set up the approver as an employee.

Q48. A warehouse uses mobile devices for locating products.
Products are listed in the Inventory module in incorrect locations. Users must therefore manually locate products to be picked.
You need to ensure that the users’ mobile device updates the locations of the products.
Which two actions should you take to update product locations by using the mobile devices? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

Manually move product to the correct physical location.

Log into a desktop computer and update the Inventory module.

Manually find the physical location of the product.

Scan a shelf barcode and update the inventory.

Q49. A manufacturing company uses Dynamics 365 Supply Chain Management.
You must review the safety stock level for raw materials.
You need to calculate the minimum coverage proposals based on standard deviation.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Q50. During a company’s busy season, the sales team experiences multiple backorders.
The company wants to use forecasting to determine seasonal buying trends.
You need to define the setup and data set required for forecasting.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Q51. Inventory in a warehouse is assigned to an inventory status of available.
You need to set up an inventory status for damaged items so that they are not sold to customers.
Which values should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Q52. You need to order the high-end tires.
What should you set up? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Q53. You need to meet the operational requirements for VendorB.
What should you do? To answer, select the appropriate options in the area.
NOTE: Each correct selection is worth one point.

Q54. You need to configure quality controls.
Which solution objects should you configure? To answer, drag the appropriate solution objects to the correct configurations. Each solution object may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

Explanation:
Box 1: Test groups
Requirement 1: 100 percent of all nutritional supplements and 50 percent of all energy drinks must be tested when production orders are completed. After a product is in testing, 100 percent of all tests must be completed.
You use the Test groups page to set up, edit, and view test groups and the individual tests that are assigned to them. The upper part of the page shows the test groups, and the lower part shows the tests that are assigned to a selected test group.
You assign several policies to a test group, such as a sampling plan, an acceptable quality level (AQL), and the requirement for destructive testing. Then, when you assign an individual test to a test group, you define additional information, such as the sequence, documents, and validity dates. For a quantitative test, the information that you define also includes the acceptable measurement values. For a qualitative test, the information includes the test variable and default outcome.
The test group that is assigned to a quality order defines the default set of tests that must be performed on the specified item. However, you can add, delete, or change tests for the quality order. Test results are reported for each test on a quality order.
Box 2: Quality groups
Requirement 2: 75 percent of all nutritional supplements and energy drinks should be tested against their required tests during an outbound process.
Quality groups
A quality group represents common testing requirements for items.
Use and create item quality groups to logically group products so that they can be assigned to quality associations for the automatic generation of quality orders.
Example of an item quality group
A manufacturing company purchases various raw materials that have the same testing requirements for incoming inspection. Therefore, the company defines a quality group and then assigns the item numbers that are associated with the raw materials to that group. Later, the company purchases a new type of raw material that has the same testing requirements. Instead of setting up new testing requirements for the new material, the company adds the item number for the new material to the existing quality group.
Reference: https://docs.microsoft.com/en-us/dynamics365/supply-chain/inventory/quality-management- processes
https://docs.microsoft.com/en-us/dynamics365/supply-chain/inventory/quality-groups
https://docs.microsoft.com/en-us/dynamics365/supply-chain/inventory/quality-test-groups

Q55. A distribution company that Dynamics 365 Supply Chain Management values inventory through standard cost. The company does not manufacture any products.
Some items require incremental updates to the standard cost. The original costs must be retained for reporting purposes You need to update the standard costs of the items you configure? TO answer, the appropriate options in the answer area.

All MB-330 Dumps and Microsoft Dynamics 365 Supply Chain Management Functional Consultant Training Courses: https://www.trainingdump.com/Microsoft/MB-330-practice-exam-dumps.html

Steps Necessary To Pass The MB-330 Exam from Training Expert TrainingDump [Q35-Q55]