[2026] Use Valid Exam D-PE-OE-01 by TrainingDump Books For Free Website [Q179-Q201]

Rate this post

[2026] Use Valid Exam D-PE-OE-01 by TrainingDump Books For Free Website

Free EMC Servers D-PE-OE-01 Official Cert Guide PDF Download

EMC D-PE-OE-01 Exam Syllabus Topics:

Section	Objectives
Topic 1: iDRAC and Lifecycle Controller Management	– iDRAC remote management configuration and usage – Lifecycle Controller provisioning and updates
Topic 2: Monitoring, Maintenance, and Troubleshooting	– Basic troubleshooting of hardware and firmware issues – System health monitoring and alerts
Topic 3: System Installation and Initial Configuration	– BIOS/UEFI configuration basics – Initial server setup and deployment workflow
Topic 4: PowerEdge Server Architecture and Components	– Server hardware components overview (CPU, memory, storage, networking) – PowerEdge system lifecycle concepts
Topic 5: Storage and RAID Configuration	– Storage management and disk troubleshooting – RAID concepts and configuration on PowerEdge systems

QUESTION 179
A system administrator needs to install OpenManage Server Administrator on 200 servers.
What is the quickest way to meet this requirement?

Use the Lifecycle Controller to install OpenManage Server Administrator on each server.

Install OME and push OpenManage Server Administrator to all 200 servers.

Use Microsoft utilities to automate the deployment of OpenManage Server Administrator.

Download OpenManage Server Administrator from Dell.com and install on each server.

QUESTION 180
A technician needs to analyze a server that is using more power than expected. The server is part of a cluster that runs jobs between 8 AM and 5 PM. The cluster is not used at other times of the day. The server runs an unsupported OS. Performance while jobs are running is a key consideration.
Which option should the technician choose from within System Profile Settings within System Setup to address this issue?

Dense Configuration

Performance Per Watt (DAPC)

Performance

Performance Per Watt (OS)

QUESTION 181
A server is configured in a 1+1 power configuration with both PSUs connected to a single PDU.
Which redundancy options does this configuration supply?

PSU redundancy only

PSU redundancy and PDU redundancy

No redundancy unless each PSU is connected to a separate PDU

PSU redundancy and Grid redundancy

QUESTION 182
Which component of the Dell EMC PowerEdge 13G server can be used as an indicator to locate a specific system within a rack?

iDRAC8

Back Panel

LCD Front Panel

System ID button

QUESTION 183
A technician is setting up SNMP Trap Alerts on a 14G servers.
After specifying the trap destination address, what should be the next step?

Enable the SMNP Client service on the iDRAC

Include the server OS IP address in the destination systems authentication script

Enable the SMNP services in the server operating system of the sending server

Send an SNMP trap test to the destination system

QUESTION 184
Which two models are 16th generation PowerEdge rack servers? (Select 2)

R650

MX760C

R760

C6620

XE9680

QUESTION 185
In which Dell EMC PowerEdge server generation was the BOSS card introduced?

12G

13G

14G

15G

QUESTION 186
A technician is sent on-site to troubleshoot a server that reports errors during POST when rebooted. The LCD is amber. The error message is as shown: correctable memory error rate exceeded for DIMM B4 The server has a limited maintenance window. The technician needs to troubleshoot efficiently.
Which step should the technician take to troubleshoot?

Reseat all memory

Swap DIMM B4 with A4

Swap DIMM B4 with B2

Replace DIMM B4

QUESTION 187
A system administrator needs to update 100 physical servers.
Which tool could they use to accomplish the task with minimum effort?

Lifecycle Controller

OpenManage Essentials

iDRAC9

OpenManage Enterprise

QUESTION 188
A technician has a server with the following memory configuration:
– Sixteen 4 GB dual-rank DIMMs
– 8 GB available to the OS
The workload intended for the server required the memory configuration to protect against some errors. Now the technician must deploy for a different workload that requires access to all available memory.
Which setting should the technician change to make all memory available to the system?

Mirrored

Optimizer

Performance

Sparing

QUESTION 189
What is the purpose of the Silicon-Based Hardware Root of Trust feature in Dell EMC PowerEdge 14G servers?

Ensures that the installed operating system is authentic

Ensures that the server has a valid Service Tag number

Ensures that no unauthorized BIOS or firmware codes are run

Ensures that the server boots only when connected to a verified network

QUESTION 190
What is the maximum number of CPU cores that can be configured in a Dell EMC PowerEdge R6525 server?

112

128

QUESTION 191
Which mobile devices are supported by Quick Sync 2.0 in 14G PowerEdge servers?

iOS devices only

iOS and Android devices only

iOS, Android, and Windows Phone devices

Android devices only

QUESTION 192
A server in an unattended remote site powers down unexpectedly. The technician assigned to the customer cannot arrive on-site until tomorrow. The customer needs the server back up and running today.
What should the technician do?

Issue a Power Supply Unit reseat command using a remote CLI

Use the RDP utility and power the server on remotely

Access the iDRAC interface and power the server on remotely

Log into the Lifecycle Controller and remotely power on the server

QUESTION 193
A new server with default iDRAC network configurations is plugged into a segregated management network configured for 10.0.0.x/24. The technician cannot connect to the iDRAC.
How can the on-site technician configure the iDRAC for network access?

Change iDRAC network settings from a workstation on the management network

Perform an AC power cycle to reset the iDRAC

Modify the iDRAC settings using the iDRAC Direct feature

Configure a DHCP reservation for the iDRAC MAC address

QUESTION 194
A technician needs to set a server to always attempt PXE boot before booting to the hard drive.
What two items does the technician need to set to achieve this?(Choose two.)

Remove all boot options except network card

Select PXE Boot from F11 Boot Manager

Change the Boot Sequence so the network card is first

Set the Legacy Boot Protocol for the network card to PXE

QUESTION 195
A technician creates two virtual disks and assigns a dedicated hot spare to each virtual disk. The technician also creates a global hot spare. A drive fails on the second virtual disk.
What is the result?

The dedicated hot spare for the virtual disk replaces the failed drive.

The global hot spare replaces the failed drive.

A copyback operation occurs between the failed drive and the dedicated hot spare.

A copyback operation occurs between the failed drive and the global hot spare.

QUESTION 196
Match each RAID level to its characteristic.

QUESTION 197
What is required to use the Quick Sync 2 feature?

OpenManage Mobile app

Type A/A USB cable

NFC

Ethernet connection to iDRAC NIC

QUESTION 198
How can a technician know whether IDRAC9 System Lockdown mode is enabled?

Lockdown activation message in red box in the iDRAC web GUI Access to LCC is disabled when the server boots

Lockdown activation message in yellow box in the iDRAC web GUI Access to LCC is disabled when the server boots

Lockdown activation message in red box in the iDRAC web GUI Access to LCC requires a password when the server boots

Lockdown activation message in yellow box in the iDRAC web GUI Access to LCC requires a password when the server boots

QUESTION 199
What is an advantage of using virtual media from a management station?

ISO can be transferred to the server using a USB flash drive.

No physical presence is required at the data center.

Remote file shares are supported.

Management station can be separated from the server by firewalls or a DMZ.

Advantages of Using Virtual Media from a Management Station Server Management and Configuration Tools (14%) Define the function of the iDRAC, login procedures, licensing, and connection methods Explain the management interface options – LCC, racadm, OMSA, iSM, OME Understanding Virtual Media Virtual Media allows administrators to remotely mount media devices (such as CD/DVD drives or ISO images) over the network to a server via the Integrated Dell Remote Access Controller (iDRAC). Purpose: Enables tasks like installing an operating system, updating firmware, or running diagnostics without needing physical access to the server.
Advantages
Option B: No physical presence is required at the data center
Remote Accessibility: Administrators can perform necessary tasks from any location, eliminating the need to be physically present at the server’s location.
Efficiency: Reduces travel time and costs associated with onsite visits.
Business Continuity: Allows for prompt responses to issues, minimizing downtime.
Dell Operate
Reference: Server Management and Configuration Tools (14%): Highlights the importance of remote management capabilities provided by tools like iDRAC and the Virtual Console.
Explanation of Other Options
Option A: ISO can be transferred to the server using a USB flash drive
Analysis: This involves physical transfer and insertion of a USB drive into the server, which contradicts the advantage of using virtual media remotely.
Conclusion: Not an advantage of virtual media from a management station.
Option C: Remote file shares are supported
Analysis: While some virtual media implementations may support remote file shares, the primary advantage is the ability to mount media remotely, not necessarily accessing file shares. Conclusion: Less accurate than Option B.
Option D: Management station can be separated from the server by firewalls or a DMZ Analysis: Firewalls and DMZs can actually hinder the use of virtual media due to blocked ports or security restrictions.
Conclusion: Not an advantage and may present challenges.
Conclusion
Using virtual media from a management station provides the significant advantage of allowing administrators to perform tasks without needing to be physically present at the data center. This enhances operational efficiency and responsiveness.

QUESTION 200
Case Study 4
A company is experiencing a noticeable decrease in performance when accessing data on their Dell EMC Isilon cluster. The cluster hosts Microsoft Windows home directories and general purpose file shares. In addition, a file pool policy moves data that has not been modified in six months to an achieve tier.
The administrator wants your assistance in understanding the reason for the slow data access. The number of users accessing the cluster has not changed. The administrator has shared the following baseline metrics. The outputs were captured from a performance- acceptable time frame.
Trace route shows:
– 3 hops between clients and the cluster
– Average latency is 3 ms
Iperf shows:
– 940 Mb/s average bandwidth
– 005 ms average jitter
Netstat on the local network shows:
– 05% average re-transmission rate
Hostcache list:
– 20 ms average roundtrip time across all clients
The administrator shows you the details of the hostcahce.list output. The output indicates that the top clients on the list have an average of 242 ms round trip time.
Based on the output, what information should be provided to the administrator?

An increase in the average round trip time indicates a network problem.

Only the aggregate of all average round trip times will indicate an issue.

An average round trip time less than 300 ms is in the acceptable range.

Recalculate and re-populate round trip times by using isi_cbind clear command.

QUESTION 201
Case Study 1
A company has several independent business units that operate globally. The company has consolidated its IT infrastructure services and operations. Common infrastructural services which include IPAM, DNS, NTP, DHCP, and SMTP have been consolidated.
The company has complimented its infrastructure development by investing in Dell EMC Isilon clusters to host its user’s home and group directories and for compliance archival purposes required by individual business units. The IT operations are located in India and the United States with its primary data center facilities co-located between New York and Texas.
The company has a total of 60 AD forests:
– 1 main domain
– 55 domains have one-way trust relationships with the main domain
– An additional 4 domains do not have any trust relationship with no future plans of establishing trust relationships with the other domains.
Users of different AD domains use different FQDN to access their corresponding file services. Additionally, the company does not plan to consolidate the AD domains and each domain uses a different IP subnet.
The users of the domains with no trust relationships have a compliance archival requirement. The company wants to all data to be replicated between New York and Texas.
How many tenant Access zones will be required?

EMC D-PE-OE-01 Official Cert Guide PDF: https://www.trainingdump.com/EMC/D-PE-OE-01-practice-exam-dumps.html

[2026] Use Valid Exam D-PE-OE-01 by TrainingDump Books For Free Website [Q179-Q201]