[2026] AZ-140 All-in-One Exam Guide Practice To your AZ-140 Exam! [Q126-Q149]

NEW QUESTION 126
You have a Windows Virtual Desktop deployment.
You have a session host named Host1 that has the disk layout shown in the exhibit. (Click the Exhibit tab.)

You plan to deploy an app that must be installed on D.
The app requires 500 GB of disk space.
You need to add a new data disk that will be assigned the drive letter D.
The solution must maintain the current performance of Host1.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

NEW QUESTION 127
You have an Azure subscription that contains a virtual network named VNet1. a storage account named storage1, and five Azure Virtual Desktop session hosts. VNet1 and storage1 ate in the East US Azure region.
The session hosts are connected to VNet1.
In storage1. you create an Azure File share named share1.
You need to ensure that the session hosts connect to share1 by using the Microsoft backbone network.
Solution: You configure network peering for VNet1.
Does this meet the goal?

NEW QUESTION 128
You have an Azure Virtual Desktop host pool that runs Windows 11 Enterprise multi-session. User sessions are load-balanced between the session hosts. Idle session timeout is 30 minutes. You plan to shut down a session host named Host1 to perform routine maintenance. You need to prevent new user sessions to Host1 without disconnecting active user sessions.
Solution: From the host pool, you change the Drain mode of Host1.
Does this meet the goal?

NEW QUESTION 129
Case Study 1 – Contoso, Ltd
Overview
Contoso, Ltd. is a law firm that has a main office in Montreal and branch offices in Paris and Seattle. The Seattle branch office opened recently.
Contoso has an Azure subscription and uses Microsoft 365.
Existing Infrastructure. Active Directory
The network contains an on-premises Active Directory domain named contoso.com and an Azure Active Directory (Azure AD) tenant. One of the domain controllers runs as an Azure virtual machine and connects to a virtual network named VNET1. All internal name resolution is provided by DNS server that run on the domain controllers.
The on-premises Active Directory domain contains the organizational units (OUs) shown in the following table.

The on-premises Active Directory domain contains the users shown in the following table.

The Azure AD tenant contains the cloud-only users shown in the following table.

Existing Infrastructure. Network Infrastructure
All the Azure virtual networks are peered. The on-premises network connects to the virtual networks.
All servers run Windows Server 2019. All laptops and desktop computers run Windows 10 Enterprise.
Since users often work on confidential documents, all the users use their computer as a client for connecting to Remote Desktop Services (RDS).
In the West US Azure region, you have the storage accounts shown in the following table.

Existing Infrastructure. Remote Desktop Infrastructure
Contoso has a Remote Desktop infrastructure shown in the following table.

Requirements. Planned Changes
Contoso plans to implement the following changes:
– Implement FSLogix profile containers for the Paris offices.
– Deploy a Azure Virtual Desktop host pool named Pool4.
– Migrate the RDS deployment in the Seattle office to Azure Virtual
Desktop in the West US Azure region.
Requirements. Pool4 Configuration
Pool4 will have the following settings:
– Host pool type: Pooled
– Max session limit: 7
– Load balancing algorithm: Depth-first
– Images: Windows 10 Enterprise multi-session
– Virtual machine size: Standard D2s v3
– Name prefix: Pool4
– Number of VMs: 5
– Virtual network: VNET4
Requirements. Technical Requirements
Contoso identifies the following technical requirements:
– Before migrating the RDS deployment in the Seattle office, obtain the recommended deployment configuration based on the current RDS utilization.
– For the Azure Virtual Desktop deployment in the Montreal office,
disable audio output in the device redirection settings.
– For the Azure Virtual Desktop deployment in the Seattle office, store the FSLogix profile containers in Azure Storage.
– Enable Operator2 to modify the RDP Properties of the Azure Virtual
Desktop deployment in the Montreal office.
– From a server named Server1, convert the user profile clicks to the
FSLogix profile containers.
– Ensure that the Pool1 virtual machines only run during business
hours.
– Use the principle of least privilege.
Which three PowerShell modules should you install on Server1 to meet the technical requirements? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

NEW QUESTION 130
You network contains an on-premises Active Directory domain that syncs to an Azure Active Directory (Azure AD) tenant. The domain contains the users shown in the following table.

You have a Windows Virtual Desktop deployment that contains the application groups shown in the following table.

You have the workspaces shown in the following table.

For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

NEW QUESTION 131
Your network contains an on-premises Active Directory domain named contoso.com that syncs to an Azure Active Directory (Azure AD) tenant.
You have an Azure subscription that contains an Azure Virtual Desktop host pool.
You create an Azure Storage account named storage1.
You need to use FSLogix profile containers in storage1 to store user profiles for a group named Group1. The solution must use the principle of least privilege.
What should you include in the solution? To answer, select the appropriate options in the answer area.

NEW QUESTION 132
You need to evaluate the RDS deployment in the Seattle office. The solution must meet the technical requirements.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

NEW QUESTION 133
You have an Azure Virtual Desktop host pool named HostPool1 that contains 20 session hosts.
You create a new scaling plan that has the Ramp-up settings shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.

NEW QUESTION 134
You have a Azure Virtual Desktop deployment.
You plan to implement the Start/Stop VMs during off-hours feature.
You need to ensure that you can stop the session hosts automatically based on the CPU utilization.
What should you do on the session hosts?

NEW QUESTION 135
Hotspot Question
You have an Azure Virtual Desktop deployment that contains 10 session hosts and a RemoteApp named App1.
You have users that connect to the deployment by using the clients shown in the following table.

You enable screen capture protection on all the session hosts.
Which users can connect to a session host by using the full desktop, and which users can connect to App1? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

NEW QUESTION 136
You have an Azure Virtual Desktop deployment.
You need to create a host pool. The solution must ensure that during periods of tow CPU usage, credits can be accumulated, and then used to raise performance above the purchased baseline during periods of high CPU usage.
Which virtual machine series should you specify when you create the pool?

NEW QUESTION 137
You have an Azure Virtual Desktop deployment.
You are configuring the outbound firewall settings for the host pool.
Which outbound URL and outbound port should you configure to ensure that the host machines maintain Windows activation? To answer, select the appropriate options In the answer area.
NOTE: Each correct selection is worth one point.

NEW QUESTION 138
Which type of host pool and load balancing algorithm should you configure to meet the performance requirements? To answer, select the appropriate options in The answer area.
NOTE: Each correct selection is worth one point.

NEW QUESTION 139
You have an Azure Active Directory Domain Services (Azure AD D5) domain named contoso.com.
You have an Azure Storage account named storage1. Storage1 hosts a file share named share1 that has share and file system permissions configured. Share1 is configured to use contoso.com for authentication, You create an Azure Virtual Desktop host pool named Pool1. Pool1 contains two session hosts that use the Windows 10 multi-session + Microsoft 365 Apps image.
You need to configure an FSLogix profile container for Pool1.
What should you do next?

NEW QUESTION 140
You have an Azure Virtual Desktop deployment.
You are configuring the outbound firewall settings for the host pool.
Which outbound URL and outbound port should you configure to ensure that the host machines maintain Windows activation? To answer, select the appropriate options In the answer area.
NOTE: Each correct selection is worth one point.

NEW QUESTION 141
You need to recommend an authentication solution that meets the performance requirements.
Which two actions should you include in the recommendation? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

NEW QUESTION 142
You are automating the deployment of an Azure Virtual Desktop host pool.
You deploy the Azure Resource Manager (ARM) template shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the Dockerfile.
NOTE: Each correct selection is worth one point.

NEW QUESTION 143
Your on-premises network contains an Active Directory domain named contoso.com that syncs with Azure AD.
You deploy an Azure Virtual Desktop pooled host pool named HostPool1 that contains five hybrid-joined session hosts.
You need to ensure that all the user sessions of HostPool1 meet the following requirements:
* Users must use roaming user profiles.
* Users must use Folder Redirection.
The solution must minimize administrative effort.
What should you use to meet each requirement? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

NEW QUESTION 144
You have an Azure Virtual Desktop deployment.
You need to create a PowerShell script to sign users out of a specific session host before you perform a maintenance task.
Which PowerShell module should you load in the script?

NEW QUESTION 145
Your on-premises network contains 20 Windows 10 devices.
You have an Azure Virtual Desktop deployment.
You need to deploy the Microsoft Remote Desktop client (MSRDC) to the devices. The MSRDC must be available to everyone who sign in to the devices.
What should you do?

NEW QUESTION 146
You have an Azure subscription that is linked to a Microsoft Entra hybrid tenant named contoso.com. The subscription contains the resources shown in the following table.

You create a new Azure Virtual Desktop host pool named HP01.
You plan to deploy new session hosts to HP01. The session hosts will be connected to VNetO1.
You need to ensure that the new session hosts can join contoso.com. The solution must minimize administrative effort.
What should you configure first?

NEW QUESTION 147
You have a Windows Virtual Desktop host pool that contains two session hosts. The Microsoft Teams client is installed on each session host.
You discover that only the Microsoft Teams chat and collaboration features work. The calling and meeting features are disabled.
You need to ensure that users can set the calling and meeting features from within Microsoft Teams.
What should you do?

NEW QUESTION 148
You have an Azure Virtual Desktop deployment.
You deploy and configure Azure Virtual Desktop in a secondary location.
You plan to perform a test failover to the secondary location, but discover existing user sessions to the primary location.
You need to sign out users from the session hosts in the primary location.
Which PowerShell cmdlet should you run?

NEW QUESTION 149
You have a Windows Virtual Desktop host pool that has a max session limit of 15. Disconnected sessions are signed out immediately.
The session hosts for the host pool are shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.