[May 11, 2022] Pass 1z0-062 Review Guide, Reliable 1z0-062 Test Engine [Q28-Q44]

5/5 - (4 votes)

[May 11, 2022] Pass 1z0-062 Review Guide, Reliable 1z0-062 Test Engine

1z0-062 Test Engine Practice Test Questions, Exam Dumps

Details for 1Z0-062

Particularly, 1Z0-062 certification test contains a total of about 67 multiple-choice questions that the students have to complete within 2 hours. If you want to pass this exam, you should try to get more than 64% of the correct answers. This Oracle test will cost you $245 and to ace it with flying colors, you should explore its topics first. Thus, here are a few of them:

Introduction to DBAAS.
Oracle network environment configuration;
User security administration;
Concepts of recovery and backup;
Developing and managing tablespaces;
Database storage structures and undo data management;
Oracle database architecture and management tools;

The procedure of earning this associate-level Oracle Database certificate expands by all odds the boundaries of candidates’ knowledge and applied experience, allowing them to accomplish complicated practical lab tasks on the final test, and then in practice on a daily basis. Meanwhile, Oracle certification tests reveal your potential and measure as well as challenge your capability to reason and act through real questions based on varied scenarios.

NO.28 One of your databases supports an OLTP workload.
The default UNDOtablespace is fixed size with:
1. RETENTION NOGUARANTEE
2. UNDO_RETENTION is 12 minutes
User SCOTTgets this error after a query on the SALES table has run for more than 15 minutes:
ORA-01555: snapshot too old
Which three factors taken separately or in some combination might be the cause? (Choose three.)

An update was made to the SALES table after the query began

An update to the SALES table was committed after the query began

A committed delete to the SALES table was made more than 12 minutes before the query began

An uncommitted update to the SALES table was made more than 12 minutes before the query began

A committed update to the SALES table was made more than 12 minutes before the query began

An uncommitted delete to the SALES table was made more than 12 minutes before the query began

An update was made to the SALES table before the query began

NO.29 In which three situations can you use threshold server-generated alerts to help diagnose and fix problems?
(Choose three.)

when free space in a locally managed tablespace falls below a specified percentage

when the number of logons per second exceeds a specific value

when a resumable statement is suspended

when the total number of locked user account exceeds a specific value

when the total number of logons exceeds a specific value

when free space in a dictionary managed tablespace falls below a specified percentage

NO.30 You are connected using SQL* Plus to a multitenant container database (CDB) with SYSDBA privileges and execute the following sequence statements:

What is the result of the last SET CONTAINER statement and why is it so?

It succeeds because the PDB_ADMIN user has the required privileges.

It fails because common users are unable to use the SET CONTAINER statement.

It fails because local users are unable to use the SET CONTAINER statement.

If fails because the SET CONTAINER statement cannot be used with PDB$SEED as the target pluggable database (PDB).

NO.31 You run a script that completes successfully using SQL*Plus that performs these actions:
1. Creates a multitenant container database (CDB)
2. Plugs in three pluggable databases (PDBs)
3. Shuts down the CDB instance
4. Starts up the CDB instance using STARTUP OPEN READ WRITE
Which two statements are true about the outcome after running the script? (Choose two.)

The seed will be in mount state.

The seed will be opened read-only.

The seed will be opened read/write.

The other PDBs will be in mount state.

The other PDBs will be opened read-only.

The PDBs will be opened read/write.

NO.32 You set the following parameters in the parameter file and restart the database instance:

Which two statements are true? (Choose two.)

The MEMORY_MAX_TARGET parameter is automatically set to 500 MB.

The PGA_AGGREGATE_TARGET and SGA_TARGET parameters are automatically set to zero.

The value of the MEMORY_MAX_TARGET parameter remains zero for the database instance.

The lower limits of the PGA_AGGREGATE_TARGET and SGA_TARGET parameters are set to 90 MB and 270 MB respectively.

The instance does not start up because Automatic Memory Management (AMM) is enabled but PGA_AGGREGATE_TARGET and SGA_TARGET parameters are set to nonzero values.

NO.33 Which three statements are true about a job chain?

It can contain a nested chain of jobs.

It can be used to implement dependency-based scheduling.

It cannot invoke the same program or nested chain in multiple steps in the chain.

It cannot have more than one dependency.

It can be executed using event-based or time-based schedules.

NO.34 On your Oracle 12c database, you Issue the following commands to create indexes SQL > CREATE INDEX oe.ord_customer_ix1 ON oe.orders (customers_id, sales_rep_id) INVISIBLE; SQL> CREATE BITMAP INDEX oe.ord_customer_ix2 ON oe.orders (customers_id, sales_rep_id); Which two statements are correct? (Choose two.)

Both the indexes are created; however, only the ORD_COSTOMER index is visible.

The optimizer evaluates index access from both the Indexes before deciding on which index to use for query execution plan.

Only the ORD_CUSTOMER_IX1 index is created.

Only the ORD_CUSTOMER_IX2 index is created.

Both the indexes are updated when a new row is inserted, updated, or deleted In the orders table.

NO.35 After implementing full Oracle Data Redaction, you change the default value for the NUMBER data type as follows:

After changing the value, you notice that FULL redaction continues to redact numeric data with zero.
What must you do to activate the new default value for numeric full redaction?

Re-enable redaction policies that use FULL data redaction.

Re-create redaction policies that use FULL data redaction.

Re-connect the sessions that access objects with redaction policies defined on them.

Flush the shared pool.

Restart the database instance.

NO.36 Which two statements are true about the Automatic Database Diagnostic Monitor (ADDM)?
(Choose two.)

The ADDM requires at least four AWR snapshots for analysis

The ADDM runs after each AWR snapshot is collected automatically by MMON

The results of the ADDM analysis are stored in the Automatic Workload Repository (AWR)

The ADDM analysis provides only diagnostics information but does not provide recommendations

The ADDM calls other advisors if required, but does not provide recommendations about the advisors

NO.37 Examine the resources consumed by a database instance whose current Resource Manager plan is displayed.
SQL> SELECT name, active_sessions, queue_length,
Consumed_cpu_time, cpu_waits, cpu_wait_time
FROM v$rsrc_consumer_group;
NAMEACTIVE_SESSIONS QUEUE_LENGTH CONSUMED_CPU_WAITS
CPU_WAIT_TIME
———————————– ——————– ——————– ——————— —————-
OLTP__ORDER__ENTRY1029690 467
6709
OTHES__GROUPS 0 059823664089
60425
SYS_GROUP 1 02420704 914
19540
DS.S_QUERIES4245946603004
55700
Which two statements are true?

An attempt to start a new session by a user belonging to DSS_QUERIES fails with an error.

An attempt to start a new session by a user belonging to OTHE_GROUPS fails with an error.

The CPU_WAIT_TIME column indicates the total time that sessions in the consumer group waited for the CPU due
to resource management.

The CPU_WAIT_TIME column indicates the total time that sessions in the consumer group waited for the CPU due
to I/O waits and latch or enqueue contention.

A user belonging to the DSS__QUERIES resource consumer group can create a new session but the session will be
queued.

NO.38 An administrator account is granted the CREATE SESSION and SET CONTAINER system privileges.
A multitenant container database (CDB) instant has the following parameter set:
THREADED_EXECUTION = FALSE
Which four statements are true about this administrator establishing connections to root in a CDB that has been opened in read only mode? (Choose four.)

You can conned as a common user by using the connect statement.

You can connect as a local user by using the connect statement.

You can connect by using easy connect.

You can connect by using OS authentication.

You can connect by using a Net Service name.

You can connect as a local user by using the SET CONTAINER statement.

NO.39 The DEFERRED_SEGMENT_CREATION parameter is set to TRUE in your database instance.
You execute the following command to create a table:

Which two statements are true?

The table is created without a segment because the storage clause is missing.

A segment is allocated when the first row is inserted in the table.

A segment is allocated when an index is created for any column in the table.

The table is created and extents are immediately allocated as per the default storage defined for its tablespace.

A segment is allocated for the table if the ALTER TABL.. ALLOCATE EXTENT command is issued.

NO.40 You install “Oracle Grid Infrastructure for a standalone server” on a host on which the
ORCL1 and ORCL2 databases both have their instances running.
Which two statements are true?

All databases subsequently created by using the Database Configuration Assistant
(DBCA) are automatically added to the Oracle Restart configuration.

Thesrvctl add databasecommand must be used to addORCL1andORCL2to the
ORACLE Restart configuration.

BothORCL1andORCL2are automatically added to the Oracle Restart configuration.

All database listeners running from thedatabase home are automatically added to the
Oracle Restart configuration.

Thecrsctl start hascommand must be used to start software services for Oracle
Automatic Storage Management (ASM) after the “Oracle Grid Infrastructure for a standalone server”installation is complete.

NO.41 Which two statements are true about Automatic Storage Management (ASM)? (Choose two.)

It mounts databases and diskgroups to make ASM files available to database instances.

It spreads files proportionally across all disks in a diskgroup, aiming to ensure that all the disks in a
diskgroup have the same I/O load.

It automatically places each disk from an external redundancy diskgroup in its own failure group.

It divides files into extents and allows an extent to span disks.

It mirrors data at the allocation unit (AU) level across failure groups within a normal or high redundancy
diskgroup.

NO.42 Examine the query and its output executed In an RDBMS Instance:

Which three statements are true about the users (other than sys) in the output? (Choose three.)

The C # # B_ADMIN user can perform all backup and recovery operations using RMAN only.

The C # # C_ADMIN user can perform the data guard operation with Data Guard Broker.

The C # # A_ADMIN user can perform wallet operations.

The C # # D_ADMIN user can perform backup and recovery operations for Automatic Storage Management (ASM).

The C # # B_ADMIN user can perform all backup and recovery operations using RMAN or SQL* Plus.

NO.43 You wish to enable an audit policy for all database users, except SYS, SYSTEM, and SCOTT.
You issue the following statements:
SQL> AUDIT POLICY ORA_DATABASE_PARAMETER EXCEPT SYS;
SQL> AUDIT POLICY ORA_DATABASE_PARAMETER EXCEPT SYSTEM;
SQL> AUDIT POLICY ORA_DATABASE_PARAMETER EXCEPT SCOTT;
For which database users is the audit policy now active?

All users except SYS

All users except SCOTT

All users except sys and SCOTT

All users except sys, system, and SCOTT

NO.44 Examine the query and its output executed In an RDBMS Instance:

Which three statements are true about the users (other than sys) in the output? (Choose three.)