Category NCS-Core

The Most Efficient NCS-Core Pdf Dumps For Assured Success [2023]

We offers you the latest free online NCS-Core dumps to practice

Registration process of the Nutanix NCS-Core Certification Exam:

Step 1: Visit the Pearson VUE website and enter the required information to take your exam. You will need a Social Security or Federal ID number, a credit card, and verification of either education or work experience. Once you have entered your information, you will be able to schedule an exam appointment on the Pearson VUE website.

Step 2: You will receive an email confirmation from the Pearson VUE website with details on where to report for your exam reservation on a specified date and time. Your reservation is not confirmed until you have received this email confirmation So it is important to watch for it. Nutanix NCS-Core Dumps help you to get success in the exam.

Step 3: Please review all instructions and instructions for parking and traffic, if applicable, before arriving at the testing center. You will need check-in on-site at the Pearson VUE Testing Center 15 minutes prior to your exam appointment time. Visitor parking is available on-site and there is also street parking available.

Step 4: After you have picked up your test booklets and submitted the required paperwork, you can begin taking your Nutanix NCS-Core Exam.

Step 5: We recommend that you allow 30 minutes to complete your exam.

Nutanix NCS-Core Exam disadvantage:

If you do not know about Nutanix technology well enough, you may suffer from unfair competition in this field because other competitors may use stolen information to make your business fail. Nutanix NCS-Core Dumps in the market would be very helpful, and you will get enough information and ability to pass this exam and become a certified professional in this field. Therefore, it is necessary for you to pass the exam to prove that all of your information is valid and reliable. Special helping products such as books, videos, or other materials can be found to help you pass the exam.

Where can you take the Nutanix NCS-Core Exam:

The NCS-100 exam can be taken at the Pearson VUE Testing Center in some areas. Pearson VUE Testing Centers can be located in different cities and regions throughout the world. Offering testing in more locations enables you to choose the location that works best for you. Nutanix NCS-Core Dumps also gives you the most updated information. Development of the test has been kept as similar as possible to the live environment.

NO.57 An administrator is responsible for the following Nutanix Enterprise Cloud environment:
* A central datacenter with a 20-node cluster with 1.5PB of storage
* Five remote sites each with a 4-node cluster with 200TB storage
The remote sites are connected to the datacenter via 1GB links with an average latency of 6 ms RTT. What is the minimum RPO the administrator can achieve for this environment?

 0 minutes

 15 minutes

 1 hour

 6 hours

Explanation
Ref:https://support-portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v5_10:wc-p

NO.58 A consultant is onsite with a customer running Foundation VM (FVM) and discovers that there is no connectivity between the FVM and their laptop. The consultant verifies the following:
* The consultant’s laptop and Nutanix nodes are plugged into a flat switch.
* The laptop, switch and nodes are plugged into supported power supplies.
* The laptop network adapters and FVM are configured with their corresponding IP addresses.
What is the cause for the connectivity failure to the FVM?

 The switch is not plugged into the power supply.

 Desktop Firewall is blocking ping requests.

 Network cables are not connected.

 Laptop WiFi configured to use DHCP.

NO.59 A customer has Metro Availability configured in Automatic Resume Mode between Site A and Site B What happens to VMs if Primary Site A has full network failure?

 Automatic protection domain promotion in Site B. VMs automatically restart in Site B

 VMs continue to run on Site A following an automatic disable of protection domains.

 An administrator must unwitness in Site B and promote protectiondomains in Site B for VMs to restart

 An administrator must promote protection domains in Site B for VMs to restart.

Explanation
Ref: https://support-portal.nutanix.com/page/documents/details/?targetId=Web-Console-Guide-Prism-v55:sto-me

NO.60 Which Nutanix feature creation is described in the Knowledge Transfer?

 Calm Blueprints

 REST API

 Self Service Portal

 Data Protection Domain

NO.61 A three-node cluster has a Nutanix Files instance with three FSVMs.
What happens after a node failure?

 The affected FSVMwill get live-migrated to another node.

 The affected FSVM will not be restarted on another node due to its agent VM setting.

 The affected FSVM will not be restarted on another node due to its VM-to-VM anti-affinity settings.

 The affected FSVM willbe restarted on another node.

Explanation
Ref:https://portal.nutanix.com/page/documents/details?targetId=Files-v3_6:fil-files-high-availability-c.html

NO.62 Refer to the exhibit.

A consultant is installing AOS 5.10 and ESXi 6.5 on three nodes. During the Foundation process, ESXi 6.5 is not available as one of the choices for hypervisor.
Which solution should the consultant use?

 Upload ESXi image to /home/Nutanix/foundation/nos/hypervisor/esx.

 Restart Foundation VM and refresh Foundation page.

 Update the Foundation whitelist from the support portal.

 Upload ESXi image to /home/Nutanix/foundation/isos/hypervisor/esx.

NO.63 An administrator learns that some security settings in a cluster have been changed. The environment is out ofcompliance with required policies.
Which function should be used to revert any settings that have changed from the defaults and prevent further violations?

 Cluster Lockdown with strong password enforcement

 Advanced Intrusion Detection Environment (AIDE)

 Security Configuration Management Automation (SCMA)

 Defense Information Systems Agency STIG enforcement

Explanation
Ref:http://myvirtualcloud.net/nutanix-scma-the-security-feature-that-could-save-your-organization/

NO.64 An administrator has a VM that consumes large amounts of storage and has the following characteristics:
* Create large / sequential writes
* Data must be kept for years
*Data is normally only accessed at the end of the year to run report
The administrator decides to use Erasure Coding to save space.
Which feature should the administrator utilize to save space for this VM?

 Inline Compression

 Flash Mode

 CacheDedup

 Post-Process Compression

NO.65 A customer wants to run SAP HANA on a Nutanix cluster with the following characteristics:
* AHV nodes
* SAP HANA version 2
* Production database files
Which configuration should be recommended to the customer?

 Start with a cluster containing three or more nodes

 Enable only compression for the container that contains the Production database

 Do not enable compression, deduplication. or erasure coding on the storage container

 Plate the SAP HANA Database on the same socket as CVM

Explanation
Ref:

NO.66 Which subnet is reserved for internal connectivity within a Nutanix Cluster?

 192.168.5.0/24

 192.168.254.0/24

 192.168.5.0/23

 192.168.5.0/26

NO.67 An administrator migrates a VM onto a new Nutanix cluster. After the migration, the administrator observes the following conditions:
* Cluster memory utilization: 64%
* Cluster CPU utilization: 19%
* Clusterstorage utilization: 32%
* Average VM CPU utilization: 25%
* Average VM CPU ready%: 24%
* Average VM memory utilization: 60%
Which two changes should the administrator make to improve VM performance? (Choose two.)

 Add more memory to the VMs.

 Reduce the number of vCPUs assigned to VMs.

 Replace high core count CPUs with high clock rate CPUs. (also can be but is physical invas)

 Reduce the number of VMs on the hosts.

Explanation
refhttp://www.joshodgers.com/tag/cpu-ready/

NO.68 Refer to the exhibit.

An administrator is commissioning a Nutanix Enterprise Cloud. Once the user VMs have been deployed and are running, the administrator finds that VMs on the same host are able to communicate, but are unable to communicate between hosts.
What must be changed to enable full inter-VM communications?

 Change the network the VMs are connected to

 Change the spanning-tree port type on the switch

 The VMs need to have static IPaddresses

 Update the switch to specifically allow VLAN 15

Explanation
Ref:https://hyperhci.com/2019/11/09/nutanix-ahv-enable-vlan-trunk-mode-on-guest-vm/

NO.69 For several days, an administrator notices the following alerts:
* CVM NIC Speed Low Warning Alerts
* Warning Alerts of CVM NIC not performing at optimal speed
* CVM is disconnected from the network Critical Alert
* Network Visualization page shows excessive dropped packets on CVM/Host Which steps should be taken to determine which problem should be addressed first?

 * Access the Hardware Page to verifyresources are available
* Analyze ail CVM Speed Alerts in the Alerts/Events page
* Analyze output for the network and interface properties and connectivity issues

 * Verify Host/CVM connectivity on the Network Visualization page
* Use toverify the bridge and bond configuration
* Review alerts/events page for the CVM disconnected error

 * Review Alerts page for NIC speed alerts and alert timing
* Analyze the genesis.out log file for process failures
* Assess the NIC properties inthe Network Visualization > Host Properties page

 * Restart networking services on the CVM
* Determine the current configuration of the affected CVM via output
* Access the Alerts/Events page for the CVM network connection failures

Explanation
Ref:https://portal.nutanix.com/page/documents/kbs/details?targetId=kA00e000000CuaDCAS

NO.70 While preparing for a new four-node cluster installation, the consultant has a Tech Review Call with the customer. The hardware is as follows:
* 4 nodes in 1 Block
* 8 x 10 GbE Ports
* 4 x 1 GbE IPMI Ports
* Adequate Ethernet ports are available
* Ethernet cables are correct and available
* Adequate rack space is available
Which remaining item must be confirmed as available onsite?

 Crash Cart

 Fibre Channel switches

 Redundant 208v power

 Redundant 110v power

NO.71 An administrator has two clusters: Site A and Site B.
Async DR is configured between the clusters as follows:
* Site A is the Primary Site
* Site B is the Secondary inactive Site, no VMs running
* Site A is fully in Production
* Site B used as Backup/Disaster Recovery
The customer wants to perform a planned failover between the sites.
How should the administrator accomplish this?

 Click Activate on the Secondary site within the Data Protection Dashboard

 Click Activate on the Secondary site and run deactive NCLI command on Primary site

 Choose Migrate on the Secondary site within the Data Protection Dashboard

 Choose Migrate on the Primary sitewithin the Data Protection Dashboard

Explanation
Ref:https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v510:wc-protection-

NO.72 A consultant creates three storage containers (container-1, container-2, container-3). The customer requires that only container-1, which will be utilized as an NFS datastore, be presented to external hosts.
However, users are able to mount all three containers.
What is causing this problem?

 Compression was turned on for all containers.

 A Container-level whitelist entry was configured.

 Deduplication was turned on for all containers.

 A Global whitelist entry was configured.

 Loading …

NCS-Core  PDF 100% Cover Real Exam Questions: https://www.trainingdump.com/Nutanix/NCS-Core-practice-exam-dumps.html

NCS-Core Exam Questions – Real & Updated Questions PDF

Pass Guaranteed Quiz 2022 Realistic Verified Free Nutanix

What are the prerequisites for the Nutanix NCS-Core Exam?

The Nutanix NCS-Core Exam has no prerequisites. However, candidates will benefit from having at least one year of experience with the Nutanix infrastructure. Hard skills such as VCB, NCE, and HA will also be beneficial. Nutanix NCS-Core Dumps help you to understand the topics in detail. Fasttest offers a host of other exams on a wide range of products, including VMware vSphere, Microsoft Hyper-V, AWS, Oracle, SQL Server.

Practice for Nutanix NCS-Core Exam by practice exams:

If you want to ensure that you will pass this exam on the first attempt, we recommend that you practice with practice exams while preparing for your exam. There are self-paced online and offline engine and test simulation tests available. While the offline exams are not as realistic as the online ones, they simulate a real exam environment that will test your knowledge of all the concepts needed to pass this certification exam. Nutanix NCS-Core Dumps TrainingDump are also available. Test Dumps are highly recommended practice before preparing for the real exam. Using the Free Nutanix NCS-100 exam dumps can surely help you prepare for your exam in a few days, but if you want to make sure that you will pass your exam, I recommend purchasing the Premium Nutanix NCS-Core Exam Dumps.

The Importance of Nutanix NCS-Core Certification

The Nutanix NCS-Core Certification is important to the career of a Nutanix engineer. It demonstrates a candidate’s ability to successfully configure and troubleshoot a Nutanix cluster. It also proves the candidate has a level of knowledge in several core topics, which may be tested on the NCE exam. Nutanix NCS-Core Dumps is an exam that measures a candidate’s knowledge and ability to answer technical questions based on the IDM. Those who attempt the certification can establish a strong career path and gain new opportunities.

Get to the Top with NCS-Core Practice Exam Questions: https://www.trainingdump.com/Nutanix/NCS-Core-practice-exam-dumps.html