CTFL-AuT - Latest Training Dumps

NEW QUESTION 12
Which statement regarding the comparison of the test levels In ISO 26262, ASPICE and CTFL Is true?

CTFL, ASPICE and ISO 26262 use the term .system’ for a product consisting of a hardware and a software component

The following lest levels are equivalent: acceptance test (CTFL). ISO 26262 safety validation (ISO
26262.4-9) and system integration test (ASPICE SYS.4),

ASPICE and ISO 26262 do not have an equivalent for system testing (CTFL).

The following test levels are equivalent: component test (CTFL), software unit test (ISO 26262.6-9) and software component verification (ASPICE. SVYE.4).

NEW QUESTION 13
Which statement regarding coding standards Is most true?

Coding standards should increase the maintainability of the source code.

Coding standards should educate the programmer

Coding standards should increase the efficiency of the programmer

Coding standards should increase the efficiency of the source code.

NEW QUESTION 14
Which statement regarding the test levels In a test environment is true?

For integration tests SiL Mil and HiL test environments are suitable

For load and stress tests. MIL and HiL test environments are suitable

The correct classification of the test levels has no died influence on the safety relevance of the test object (with regard to ISO 26262).

For component tests, St and MiL test environments are suitable

NEW QUESTION 15
Which statement regarding the objective of ASPICE and ISO 26262 Is true?

To determine the capacity of the product development process, ISO 26262 defines assessable requirements for these processes independently from the critically. For the development of E’E systems.
ASPICE defines requirements for the processes and methods to be used by the tester depending on the ASIL.

For the development of E£ systems. ISO 26262 defines requirements for the processes and methods to be used by the tester depending on the ASH. To determine the capability of the product development process. ASPICE defines assessable requirements for these processes, independently from the critically

For the development of E/E systems, ISO 26262 defines requirements for the processes and methods to be used by the tester independently from the ASIL. To determine the capability of the product development process. ASPICE defines assessable requirements for those processes depending on the critically.

To determine the capability of the product development process, ISO 26262 defines requirements for the processes and methods to be used by the tester depending on the ASIL. For the development of E/E systems. ASPICE defines assessable requirements for the processes, Independently from the criticality.

NEW QUESTION 16
Which of the following statements regarding MIL test environments is true?

For a MIL test environment NO environmental model is necessary

In the MILtest environment, stimulations and observations are possible anywhere via access points.

In the MIL test environment, thetest object is available as compiled code and it is not readable by a human being.

In the MiL test environment, additional hardware is necessary to implement access points.

NEW QUESTION 17
Which Automotive Safety Integrity Levels does ISO 26262 describe?

ASIL A, ASIL B, ASIL C, ASIL D

MlL, SiL, PiL, HiL, ViL

QM, ASH A, ASIL B, ASIL C, ASIL D

N (None), P (Partly). L (Largely). F (Fully)

NEW QUESTION 18
Which statement regarding the MiL design and use is true?

The objective of using a Hi test environment is mainly to find non-functional errors in the model

The HIL test environment is as complex as a MiL or SiL test environment with regards to the complexity of its parts

Typically, the test for the coned behavior of a control unit’s functions is performed on a component Hi.

In contrast to the MiL and Si test environments, pausing or stopping is possible in a HiL test environment thanks to a real the capable computer

NEW QUESTION 19
Which statement regarding the MiL design and use is true?

The objective of using a Hi test environment is mainly to find non-functional errors in the model

The HIL test environment is as complex as a MiL or SiL test environment with regards to the complexity of its parts

Typically, the test for the coned behavior of a control unit’s functions is performed on a component Hi.

In contrast to the MiL and Si test environments, pausing or stopping is possible in a HiL test environment thanks to a real the capable computer

NEW QUESTION 20
Which statement characterizes back-to-back testing?

Back-to-back testing is a variation of pair programming in which the testers should sit back to back to be able to work as independently as possible from each other.

Back-to-back testing compares test objects with mainly overlapping requirements to recognize the results of requirement change.

Back-to-back testing compares lest objects which are based on the same requirements.

Back-to-back testing compares different execution environments of the same test object

NEW QUESTION 21
The following methods table shows a partial functional safety guideline of an OEM (Car Maker):

What do the plus symbols in the table mean for the taster of the supplier?

The tester of the suppler must choose an appropriate combination of methods and explain Ms choice.
The methods with a double plus symbol should be given higher consideration

Single plus symbol means .should be applied by the tester of the suppler”, double plus symbol means
“can be applied by the tester of the suppler”.

A single plus symbol means .must be covered by each tester of the supplier’. double plus symbol means
“must be tested for applicability by me tester of the contractor”.

Single plus symbol means .must be applied by the tester of the suppler”, double plus symbol means ‘can be applied by the tester of the supplier

NEW QUESTION 22
Which of the following options Is NOT a general part of a test environment?

Test plan

Laboratory

Real-time PC

Communication device

NEW QUESTION 23
Which statement regarding the test levels In a test environment is true?

For integration tests SiL Mil and HiL test environments are suitable

For load and stress tests. MIL and HiL test environments are suitable

The correct classification of the test levels has no died influence on the safety relevance of the test object (with regard to ISO 26262).

For component tests, St and MiL test environments are suitable

NEW QUESTION 24
Which of the following options describes a combination of typical parts of a HiL environment?

Breakout box, Software-Compiler, real parts

Test case simulator, rest bus simulation, power supply

Electric error simulation, signal processing, processor simulation

Power supply, real time capable computer electric error simulation

NEW QUESTION 25
Which statement regarding the contribution of the tester to a safety culture is true?

The tester always takes the overall context of the product development Into account when she/he executes their tasks

The tester creates the hardware-software interface and provides this document to the safety manager

The tester performs the hazard analysis and the risk assessment for the product at the beginning of the project.

In systems that could potentially lead to physical injury or damage to the health of people the tester analyses potential hazards.

NEW QUESTION 26
In the release process, which of the following work products. Information and documents are the typical output of the tester?

Tested lest objects

Insulation recommendation

Non-detected defects

Change request

NEW QUESTION 27
Which of the statements regarding traceability in Automotive SPICES3.x is true?

The linking of requirements, test cases and test togs provides traceability and enables the desired verification of test cases for test case coverage

A1:N relation exists; for example If a test case is tested with the help of several requirements and is therefore linked to several requirements

The linking of a requirement, a derived test case and the associated test implementation provides the base for a complete testability.

With complete tractably It Is possible to trace test cases to their requirements and test cases which have been executed to their corresponding results.

NEW QUESTION 28
Which of the following options describes a combination of typical parts of a HiL environment?

Breakout box, Software-Compiler, real parts

Test case simulator, rest bus simulation, power supply

Electric error simulation, signal processing, processor simulation

Power supply, real time capable computer electric error simulation

NEW QUESTION 29
Which constraints does a SiL test environment have?

Numerous internal signals of the test object can be stimulated or observed.

The test execution can be paused anytime for further analyses.

Electric error scenarios can be tested early.

In the SiL environment the simulation time is generally shorter than the real time.

Category CTFL-AuT

[Q12-Q29] Exam Questions and Answers for CTFL-AuT Study Guide Questions and Answers!