NSE7_LED-7.0 - Latest Training Dumps

Get 100% Authentic Fortinet NSE7_LED-7.0 Dumps with Correct Answers

New Training Course NSE7_LED-7.0 Tutorial Preparation Guide

The NSE7_LED-7.0 certification exam is a comprehensive exam that covers a range of topics, including Fortinet Secure SD-WAN, FortiGate Cloud-Managed Security, FortiNAC, and FortiSwitch. NSE7_LED-7.0 exam is designed to assess the candidate’s knowledge and skills in deploying, configuring, and managing Fortinet security solutions in a LAN Edge environment. NSE7_LED-7.0 exam is also designed to test the candidate’s ability to troubleshoot and resolve issues related to Fortinet security solutions.

Q18. When you configure a FortiAP wireless interface for auto TX power control which statement describes how it configures its transmission power”?

Every 30 seconds the AP will measure the signal strength of the AP using the client The AP will adjust its signal strength up or down until the AP signal is detected at -70 dBm

Every 30 seconds FortiGate measures the signal strength of adjacent AP interfaces It will adjust its own AP power to match the adjacent AP signal strength

Every 30 seconds FortiGate measures the signal strength of adjacent FortiAP interfaces It will adjust the adjacent AP power to be detectable at -70 dBm

Every 30 seconds FortiGate measures the signal strength of the weakest associated client The AP will then configure its radio power to match the detected signal strength of the client

Q19. Refer to the exhibit.

By default FortiOS creates the following DHCP server scope for the FortiLink interface as shown in the exhibit What is the objective of the vci-string setting?

To ignore DHCP requests coming from FortiSwitch and FortiExtender devices

To reserve IP addresses for FortiSwitch and FortiExtender devices

To restrict the IP address assignment to FortiSwitch and FortiExtender devices

To restrict the IP address assignment to devices that have FortiSwitch or FortiExtender as their hostname

Q20. Refer to the exhibit.

Examine the IPsec VPN phase 1 configuration shown in theexhibit
An administrator wants to use certificate-based authentication for an IPsec VPN user Which three configuration changes must you make on FortiGate to perform certificate-based authentication for the IPsec VPN user? (Choose three)

Create a PKI user for the IPsec VPN user, and then configure the IPsec VPN tunnel to accept the PKI user as peer certificate

In the Authentication section of the IPsec VPN tunnel in the Method drop-down list select Signature and then select the certificate that FortiGate will use for IPsec VPN

In the IKE section of the IPsec VPN tunnel in the Mode field select Main (ID protection)

Import the CA that signed the user certificate

Enable XAUTH on the IPsec VPN tunnel

Q21. Refer to the exhibit.

Examine the FortiGate user group configuration and the Windows AD LDAP group membership information shown in the exhibit FortiGate is configured to authenticate SSL VPN users against Windows AD using LDAP The administrator configured the SSL VPN user group for SSL VPN users However the administrator noticed that both the student and j smith users can connect to SSL VPN Which change can the administrator make on FortiGate to restrict the SSL VPN service to the student user only?

In the SSL VPN user group configuration set Group Nam to CN-SSLVPN, CN=”users, DC-trainingAD, DC-training, DC-lab

In the SSL VPN user group configuration, change Name to cn=sslvpn, CN=users, DC=trainingAD, Detraining, DC-lab.

In the SSL VPN user group configuration set Group Name to ::;=Domain users.CN-Users/DC=trainingAD, DC-training, DC=lab.

In the SSL VPN user group configuration change Type to Fortinet Single Sign-On (FSSO)

Q22. Which two statements about the MAC-based 802 1X security mode available on FortiSwitch are true? (Choose two.)

FortiSwitch authenticates a single device and opens the port to other devices connected to the port

FortiSwitch authenticates each device connected to the port

It cannot be used in conjunction with MAC authentication bypass

FortiSwitch can grant different access levels to each device connected to the port

Q23. Refer to the exhibit.

Examine the RADIUS server configuration shown in the exhibit
An administrator has configured a RADIUS server on FortiGate that points to FortiAuthenticator FortiAuthenticator is acting as an authentication proxy and is configured to relay all authentication requests to a remote Windows AD server using LDAP While testing the configuration the administrator noticed that the diagnosetest authserver command worked with PAP, however authentication requests failed when using MSCHAP2 Which two solutions can the administrator implement to get MSCHAP2 authentication to work” (Choose two.)

On FortiAuthenticator enable Windows Active Directory Domain Authentication to add FortiAuthenticator to the Windows domain

On FortiGate configure the NAS IP setting on the RADIUS
server

On FortiAuthenticator change the back-end authentication server from LDAP to RADIUS

On FortiGate update the Secret setting on the RADIUS server

Q24. An administrator is testing the connectivity for a new VLAN The devices in the VLAN are connected to a FortiSwitch device that is managed by FortiGate Quarantine is disabled on FortiGate While testing the administrator noticed that devices can ping FortiGate and FortiGate can ping the devices The administrator also noticed that inter-VLAN communication works However intra-VLAN communication does not work Which scenario is likely to cause this issue?

The FortiSwitch MAC address table is missing entries

The native VLAN configured on the ports is incorrect

The FortiGate ARP table is missing entries

Access VLAN is enabled on the VLAN

Q25. You are configuring a FortiGate wireless network to support automated wireless client quarantine using IOC Which two configurations must you put in place for a wireless client to be quarantined successfully? (Choose two)

Configure the wireless network to be in tunnel mode

Configure the FortiGate device in the Security Fabric with a FortiAnalyzer device

Configure a firewall policy to allow communication

Configure the wireless network to be in bridge mode

Q26. Where can FortiGate learn the FortiManager IP address or FQDN for zero-touch provisioning’?

From an LDAP server using a simple bind operation

From a TFTP server

From a DHCP server using options 240 and 241

From a DNS server using A or AAAA records

Q27. Which FortiSwitch VLANs are automatically created on FortGate when the first FortiSwitch device is discovered1?

default quarantine, rspan voice video onboarding and nac_segment

access, quarantine, rspan. voice, video, and onboarding

default quarantine rspan voice video and nac_segment

fortilink. quarantine erspan voice video and onboarding

Q28.

Wireless guest users are unable to authenticate because they are getting a certificate error while loading the captive portal login page.This URL string is the HTTPS POST URL guest wireless users see when attempting to access the network using the web browser

Which two settings are the likely causes of the issue? (Choose two.)

The external server FQDN is incorrect

The wireless user’s browser is missing a CA certificate

The FortiGate authentication interface address is using HTTPS

The user address is not in DDNS form

Q29. An administrator is testing the connectivity for a new VLAN The devices in the VLAN are connected to a FortiSwitch device that is managed by FortiGate Quarantine is disabled on FortiGate While testing the administrator noticed that devices can ping FortiGate and FortiGate can ping the devices The administrator also noticed that inter-VLAN communication works However intra-VLAN communication does not work Which scenario is likely to cause this issue?

Access VLAN is enabled on the VLAN

The native VLAN configured on the ports is incorrect

The FortiSwitch MAC address table is missing entries

The FortiGate ARP table is missing entries

Q30. Refer to the exhibit.

Examine the FortiGate configuration FortiAnalyzer logs and FortiGate widget shown in the exhibit An administrator is testing the Security Fabric quarantine automation The administrator added FortiAnalyzer to the Security Fabric and configured an automation stitch to automatically quarantine compromised devices The test device (::.:.:.!) s connected to a managed Fort Switch dev :e After trying to access a malicious website from the test device, the administrator verifies that FortiAnalyzer has a log (or the test connection However the device is not getting quarantined by FortiGate as shown in the quarantine widget Which two scenarios are likely to cause this issue? (Choose two)

The web filtering rating service is not working

FortiAnalyzer does not have a valid threat detection services license

The device does not have FortiClient installed

FortiAnalyzer does not consider the malicious website an indicator of compromise (IOC)

Q31. Refer to the exhibit.

Examine the FortiSwitch security policy shown in the exhibit
If the security profile shown in the exhibit is assigned to all ports on a FortiSwitch device for 802 1X authentication which statement about the switch is correct?

FortiSwitch cannot authenticate multiple devices connected to the same port

FortiSwitch will try to authenticate non-802 1X devices using the device MAC address as the username and password

FortiSwitch will assign non-802 1X devices to the onboarding VLAN

All EAP messages will be terminated on FortiSwitch

Q32. Which two statements about FortiSwitchmanager are true1? (Choose two)

Per-device management is the default management mode on FortiManager

FortiManager obtains the FortiSwitch status information by querying the FortiGate REST API every three minutes

If the administrator makes any changes on FortiSwitch manager they must also install those changes on FortiGate so that those changes are applied on the managed switches

Any switch discovered or authorized on FortiGate must be added manually on FortiSwitch manager

Q33. An administrator has configured an SSID in bridge mode for corporate employees All APs are online and provisioned using default AP profiles Employees are unable to locate the SSID to conned Which two configurations can the administrator verify? (Choose two)

Verify that the broadcast SSID option is enabled in the SSID configuration

Verify that the Block Intra-SSID Traffic (intra-vap-privacy) option in the SSID configuration is disabled

Verify that the SSID to an AP group that should be broadcasting the SSID is applied

Verify that the SSID is manually applied on AP profiles for both 2 4 GHz and 5 GHz radios

Fortinet NSE7_LED-7.0 exam is a challenging and comprehensive exam that requires a deep understanding of the LAN Edge and its associated technologies. NSE7_LED-7.0 exam consists of multiple-choice questions and is designed to test the candidate’s knowledge and skills in areas such as LAN Edge architecture, routing protocols, security policies, and device management. Candidates who pass the exam will receive Fortinet’s NSE 7 certification, which is recognized as a benchmark of expertise in the field of network security.

Dumps of NSE7_LED-7.0 Cover all the requirements of the Real Exam: https://www.trainingdump.com/Fortinet/NSE7_LED-7.0-practice-exam-dumps.html

Category NSE7_LED-7.0

Get 100% Authentic Fortinet NSE7_LED-7.0 Dumps with Correct Answers [Q18-Q41]

[Apr 03, 2024] Lesson Brilliant PDF for the NSE7_LED-7.0 Tests Free Updated Today [Q19-Q40]