F5 - Latest Training Dumps

Pass 201 Exam with Updated 201 Exam Dumps PDF 2024

201 Exam Dumps – Free Demo & 365 Day Updates

F5 201 (BIG-IP Administrator) Certification Exam is a professional-level certification exam offered by F5 Networks, a leading provider of application delivery networking technology. BIG-IP Administrator Exam certification exam is designed to validate the skills and knowledge of network administrators who work with F5 BIG-IP application delivery controllers. Passing the F5 201 certification exam demonstrates an individual’s ability to manage, configure, and troubleshoot complex F5 BIG-IP environments.

NO.152 As a part of the Setup Utility, the administrator sets the host name for the BEl IGP.
What would be the result if the two systems in a redundant pair were set to the
same host name.

Host names do not matter in redundant pair communication.

In a redundant pair, the two systems will always have the same host name. The parameter is synchronized between the systems.

The first
time
the systems
are synchronized
the receiving
system will be assigned the same selfElIP addresses as the source system.

When the administrator attempts to access the configuration utility using the host name, they will always connect to the active system.

NO.153 An application is configured so that the same pool member must be used for an entire session, as well as for HTTP and FTP traffic.
A user reports that a session has terminated, and the user must restart the session. The BIG-IP Administrator determines that the active BIG-IP device failed over to the standby BIG-IP device. Which configuration settings should the BIG-IP Administrator verify to ensure proper behaviour when BIG-IP failover occurs?

cookie persistence and session timeout

Stateful failover and Network Failover detection

Persistence mirroring and Match Across Services

syn-cookie insertion threshold and connection low-water mark

NO.154 The current status of a given pool member is nknown. Which condition could explain that state. The current status of a given pool member is .nknown. Which condition could explain that state.

The member has no monitor assigned to it.

The member has a monitor assigned to it and the most recent monitor was successful.

The member has a monitor assigned to it and the monitor did not succeed during the most recent timeout period.

The member’s node has a monitor assigned to it and the monitor did not succeed during the most recent timeout period.

NO.155 Which three properties can be assigned to nodes? (Choose three.)

ratio values

priority values

health monitors

connection limits

loadbalancing mode

NO.156 A node is a member of various pools and hosts different web applications. If a web application is unavailable, the BIG-IP appliance needs to mark the pool member down for that application pool. What should a BIG-IP Administrator deploy at the pool level to accomplish this?

A UDP monitor with a custom interval/timeout

A combination of ICMP + TCP monitor

An HTTP monitor with custom send/receive strings

A TCP monitor with a custom interval/timeout

NO.157 During a high-demand traffic event, the BIG-IP Administrator needs to limit the number of new connections per second allowed to a Virtual Server.
What should the administrator apply to accomplish this task?

An HTTP Compression profile to the Virtual Server

A connection rate limit to the Virtual Server

A connection limit to the Virtual Server

A OneConnect profile to the Virtual Server

NO.158 Refer to the exhibit.

During a planned upgrade lo a BIG-IP HA pair running Active/Standby, an outage to application traffic is reported shortly after the Active unit is forced to Standby Reverting the flower resolves the outage. What should the BIG-IP Administrator modify to avoid an outage during the next for over event?

The Tag voice on the Standby device

The interface on the Active device to 1.1

The Tag value on the Active device

The Interface on the Standby device to 1.1

NO.159 A Standard Virtual Server for a web application is configured with Automap for the Source Address Translation option. The original source address of the client must be known by the backend servers. What should the BIG-IP Administrator configure to meet this requirement?

The Virtual Server type as Performance (HTTP)

An HTTP profile to insert the X-Forward-For header

An HTTP Transparent profile

A SNAT Pool with the client IP

NO.160 Refer to the exhibit.

An LTM device has a virtual server mapped to www.f5.com. Users report that when they connect to
/resources/201.1.2h.l_l.com they are unable to receive content.
What is the likely cause of the issue?

The pool associated with the virtual server does not have priority group activation enabled.

The virtual address does not have ARP enabled.

The virtual address does not have route advertising enabled.

The pool associated with the virtual server is falling its health check.

NO.161 Which two statements are true about NATs? (Choose two.)

NATs support UDP, TCP, and ICMP traffic.

NATs can be configured with mirroring enabled or disabled.

NATs provide a one-to-one mapping between IP addresses.

NATs provide a many-to-one mapping between IP addresses.

NO.162 A site wishes to perform source address translation on packets from some clients but not others. The determination is not based on the client’s IP address, but on the virtual servers their packets arrive on. What could best accomplish this goal.

A SNAT for all addresses could
be defined,
and then disable the SNAT processing for select VLANs.

Some virtual servers could be associated with SNAT pools and others not associated with SNAT pools.

The decision to perform source address translation is always based on VLAN. Thus, the goal cannot be achieved.

The decision to perform source address translation is always based on a client’s address (or network). Thus, this goal cannot be achieved.

NO.163 Which IP address will the client address be changed to when SNAT automap is specified within a Virtual Server configuration?

The floating self-IP address on the VLAN where the packet leaves the system.

The floating self-IP address on the VLAN where the packet arrives on the system.

It will alternate between the floating and non floating self-IP address on the VLAN where the packet leaves the system so that port exhaustion is avoided.

It will alternate between the floating and non floating self-IP address on the VLAN where the packet arrives on the system so that port exhaustion is avoided.

NO.164 What is required for a virtual server to support clients whose traffic arrives on the internal VLAN and pool members whose traffic arrives on the external VLAN?

That support is never available.

The virtual server must be enabled for both VLANs.

The virtual server must be enabled on the internal VLAN.

The virtual server must be enabled on the external VLAN.

NO.165 Which statement
is true concerning the default
communication between a redundant pair of BIGElIP devices.

Communication between the systems cannot be effected by
port lockdown settings.

Data for both connection and persistence mirroring are shared through the same TCP connection.

Regardless of the configuration,
some data is communicated between the systems at regular intervals.

Connection mirroring data is shared through the serial faEl ilover cable unless network failover is enabled.

NO.166 You need to terminate client SSL traffic at the BIG-IP and also to persist client traffic to the same pool member based on a BIG IP supplied cookie.
Which four are profiles that would normally be included in the virtual server’s definition? (Choose four.)

TCP

HTTP

HTTPS

ClientSSL

ServerSSL

CookieBased Persistence

NO.167 A BIG-IP Administrator is creating a new Trunk on the BIG-IP device. What objects should be added to the new Trunk being created?

Interfaces

Network routes

VLANS

IP addresses

NO.168 Which statement is true concerning cookie persistence.

Cookie persistence allows persistence independent of IP addresses.

Cookie persistence allows persistence even if the data are encrypted from client to pool member.

Cookie persistence uses a cookie that stores the virtual server, pool name, and member IP address in clear text.

If a client’s browser accepts cookies, cookie persistence will always cause a cookie to be written to the client’s file system.

NO.169 The incoming client IP address is 195.64.45.52 and the last five connections have been sent to members A, C, E, D and B. Given the virtual server, pool, and persistence definitions and statistics shown in the above graphic, which member will be used for the next connection?

10.10.20.1:80

10.10.20.2:80

10.10.20.3:80

10.10.20.4:80

10.10.20.5:80

It cannot be determined with the information given.

NO.170 What should the 816-IP Administrator provide when opening a new ticket with F5 Support?

bigip.license file

QKViewfile

Device root password

SSL private keys

NO.171 A BIG-IP Administrator creates an HTTP Virtual Server using an iApp template. After the Virtual Server is created, the user requests to change the destination IP addresses. The BIG-IP Administrator tries to change the destination IP address from 10.1.1.1 to 10.2.1.1 in Virtual Server settings, but receives the following error:
The application service must be updated using an application management interface What is causing this error?

The Application Service was NOT deleted before making the IP address change.

The IP addresses are already in use.

The Application Services have Strict Updates enabled.

The IP addresses used are NOT from the same subnet as the Self IP.

NO.172 What is the purpose of MAC masquerading.

to prevent ARP cache errors

to minimize ARP entries on routers

to minimize connection loss due to ARP cache refresh delays

to allow both BIGElIP devices to simultaneously use the same MAC address

NO.173 Some users who connect to a busy Virtual Server have connections reset by the BIG-IP system. Pool member resources are NOT a factor in this behavior. What is a possible cause for this behavior?

The Connection Rate Limit is set too high

The server SSL Profile has NOT been reconfigured.

The Connection Limit is set too low.

The Rewrite Profile has NOT been configured.

F5 201 (BIG-IP Administrator) certification exam is an essential credential for IT professionals who work with F5 BIG-IP products. 201 exam covers a wide range of topics related to F5 BIG-IP products, and successful completion demonstrates that the individual has the necessary knowledge and skills to effectively manage and maintain these products in a corporate environment. BIG-IP Administrator Exam certification is administered by Pearson VUE and can be taken at any Pearson VUE testing center worldwide.

201 Dumps – Pass Your Certification Exam: https://www.trainingdump.com/F5/201-practice-exam-dumps.html

Practice Examples and Dumps & Tips for 2022 Latest 101 Valid Tests Dumps

Latest [May 29, 2022] 100% Passing Guarantee – Brilliant 101 Exam Questions PDF

How to study the F5 101 Exam

TrainingDump expert team recommends you to prepare some notes on these topics along with it don’t forget to practice F5 Application Delivery Fundamentals 101 Exam which been written by our expert team, Both these will help you a lot to clear this exam with good marks.

Please go to Practice Examples and Dumps & Tips for 2022 Latest 101 Valid Tests Dumps [Q144-Q159] to view the test

F5 101 Exam Syllabus Topics:

Topic	Details
Topic 1	Explain the purpose and functionality of ports in general Explain the purpose of and use cases for full proxy and packet forwarding packet based architectures
Topic 2	Explain Protocols and Technologies Specific to the Data Link Layer Given a list of situations, determine which would be appropriate for the use of iApps
Topic 3	Given a situation in which a client connects to a remote host Explain the purpose and functionality of a cookie
Topic 4	Given a list of situations, determine which is appropriate for a packet based architecture Explain the purpose of a switch’s forwarding database
Topic 5	Given a fragment, identify what information is needed for reassembly Given an IP address and net mask, determine the network IP and the broadcast IP
Topic 6	Explain protocols and apply technologies specific to the network layers Explain the advantages and configurations of high availability (HA)
Topic 7	Explain the purpose, use, and advantages of iApps Explain the purpose and functionality of a broadcast domain
Topic 8	Explain the features and functionality of protocols and technologies specific to the transport layer Explain the purpose and functionality of link aggregation
Topic 9	Given a list of situations, determine which would be appropriate for the use of iRules Explain the purpose and functionality of Routing protocols

101 Application Delivery Fundamentals Content

The 80 questions that you will be facing in your 101 Application Delivery Fundamentals test will be presented in 4 sections according to the following content:

Configuration

In this section, you will be asked to configure VLANs, determine connectivity requirements, implement routing services, and assign IP addresses according to the scenarios presented.

Troubleshooting

Your knowledge of identifying errors in networks and applications, verifying traffic destinations, and checking Layer 1 and Layer 2 connectivity will be tested in this part.

Maintenance

This area tests you on your ability to attest functionality and eligibility for upgrades and interpret the flow of traffic, health of the system, and service stats in relation to a given case study.

Knowledge

The fourth segment is dedicated to checking your knowledge of the utilization of ICMP, OSI model functionality, TLS/SSL, VPN, High Availability, and various support services.

101 are Available for Instant Access: https://www.trainingdump.com/F5/101-practice-exam-dumps.html

Category F5

Pass 201 Exam with Updated 201 Exam Dumps PDF 2024 [Q152-Q173]

Practice Examples and Dumps & Tips for 2022 Latest 101 Valid Tests Dumps [Q144-Q159]

How to study the F5 101 Exam

F5 101 Exam Syllabus Topics:

101 Application Delivery Fundamentals Content