Category Cisco

300-710 Dumps By Pros – 1st Attempt Guaranteed Success

100% Guarantee Download 300-710 Exam Dumps PDF Q&A

Cisco 300-710 certification exam is ideal for IT professionals who want to specialize in network security and seeking to earn a certification that demonstrates their expertise. 300-710 exam is also suitable for network security engineers, network administrators, and security analysts who want to enhance their knowledge and skills in securing networks with Cisco Firepower. Candidates who pass 300-710 exam will be able to design, implement, and manage advanced security solutions using Cisco Firepower technology.

Cisco 300-710 certification exam is an intermediate-level exam that focuses on securing networks with Cisco Firepower. 300-710 exam is designed to test a candidate’s knowledge and skills related to implementing and managing advanced security features on Cisco Firepower and Firepower Threat Defense platforms. 300-710 exam covers a wide range of topics, including firewall configuration, intrusion prevention, network access control, and advanced malware protection.

NO.79 A company is in the process of deploying intrusion prevention with Cisco FTDs managed by a Cisco FMC. An engineer must configure policies to detect potential intrusions but not block the suspicious traffic. Which action accomplishes this task?

 Configure IDS mode when creating or editing a policy rule under the Cisco FMC Intrusion tab in Access Policies section by unchecking the “Drop when inline” option.

 Configure IPS mode when creating or editing a policy rule under the Cisco FMC Intrusion tab in Access Policies section by checking the “Drop when inline” option.

 Configure IPS mode when creating or editing a policy rule under the Cisco FMC Intrusion tab in Access Policies section by unchecking the “Drop when inline” option.

 Configure IDS mode when creating or editing a policy rule under the Cisco FMC Intrusion tab in Access Policies section by checking the “Drop when inline” option.

NO.80 Which command is run on an FTD unit to associate the unit to an FMC manager that is at IP address 10.0.0.10, and that has the registration key Cisco123?

 configure manager local 10.0.0.10 Cisco123

 configure manager add Cisco123 10.0.0.10

 configure manager local Cisco123 10.0.0.10

 configure manager add 10.0.0.10 Cisco123

Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/misc/fmc-ftd-mgmt-nw/fmc-ftd-mgmt-nw.html#id_106101

NO.81 An organization has seen a lot of traffic congestion on their links going out to the internet.
There is a Cisco Firepower device that processes all of the traffic going to the internet prior to leaving the enterprise.
How is the congestion alleviated so that legitimate business traffic reaches the destination?

 Create a flexconfig policy to use WCCP for application aware bandwidth limiting

 Create a VPN policy so that direct tunnels are established to the business applications

 Create a NAT policy so that the Cisco Firepower device does not have to translate as many addresses

 Create a QoS policy rate-limiting high bandwidth applications

NO.82 Which two statements about deleting and re-adding a device to Cisco FMC are true? (Choose two.)

 An option to re-apply NAT and VPN policies during registration is available, so users do not need to re- apply the policies after registration is completed.

 Before re-adding the device in Cisco FMC, you must add the manager back in the device.

 No option to delete and re-add a device is available in the Cisco FMC web interface.

 The Cisco FMC web interface prompts users to re-apply access control policies.

 No option to re-apply NAT and VPN policies during registration is available, so users need to re-apply the policies after registration is completed.

Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide-v60/Device_Management_Basics.html

NO.83 Which command is entered in the Cisco FMC CLI to generate a troubleshooting file?

 show running-config

 show tech-support chassis

 system support diagnostic-cli

 sudo sf_troubleshoot.pl

Section: Management and Troubleshooting
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/security/sourcefire-defense-center/117663-technote- SourceFire-00.html

NO.84 An administrator is optimizing the Cisco FTD rules to improve network performance, and wants to bypass inspection for certain traffic types to reduce the load on the Cisco FTD. Which policy must be configured to accomplish this goal?

 prefilter

 intrusion

 identity

 URL filtering

NO.85 An engineer currently has a Cisco FTD device registered to the Cisco FMC and is assigned the address of 10 10.50.12. The organization is upgrading the addressing schemes and there is a requirement to convert the addresses to a format that provides an adequate amount of addresses on the network What should the engineer do to ensure that the new addressing takes effect and can be used for the Cisco FTD to Cisco FMC connection?

 Delete and reregister the device to Cisco FMC

 Update the IP addresses from IFV4 to IPv6 without deleting the device from Cisco FMC

 Format and reregister the device to Cisco FMC.

 Cisco FMC does not support devices that use IPv4 IP addresses.

NO.86 A network administrator is deploying a Cisco IPS appliance and needs it to operate initially without affecting traffic flows.
It must also collect data to provide a baseline of unwanted traffic before being reconfigured to drop it. Which Cisco IPS mode meets these requirements?

 failsafe

 inline tap

 promiscuous

 bypass

NO.87 Refer to the exhibit An engineer is modifying an access control pokey to add a rule to inspect all DNS traffic that passes through the firewall After making the change and deploying the pokey they see that DNS traffic is not bang inspected by the Snort engine What is the problem?

 The rule must specify the security zone that originates the traffic

 The rule must define the source network for inspection as well as the port

 The action of the rule is set to trust instead of allow.

 The rule is configured with the wrong setting for the source port

NO.88 On the advanced tab under inline set properties, which allows interfaces to emulate a passive interface?

 transparent inline mode

 TAP mode

 strict TCP enforcement

 propagate link state

NO.89 A network administrator wants to configure a Cisco Secure Firewall Threat Defense instance managed by Cisco Secure Firewall Management Center to block traffic to known cryptomning networks. Which system settings must the administrator configure in Secure Firewall Management Center to meet the requirement?

 Access Policy. Security Intelligence

 Malware Policy.

 Rules Intrusion Policy. Security Intelligence

 Access Policy. Rules

To block traffic to known cryptomining networks using Cisco Secure Firewall Threat Defense (FTD) managed by Cisco Secure Firewall Management Center (FMC), the network administrator needs to configure Security Intelligence in an Access Control Policy. Security Intelligence allows administrators to block traffic based on threat intelligence feeds, which include known malicious IP addresses, domains, and URLs.
Steps:
* Navigate to Policies > Access Control > Access Control Policy in FMC.
* Edit or create an Access Control Policy.
* Go to the Security Intelligence tab.
* Enable the relevant threat intelligence feeds that include cryptomining networks.
* Apply the policy to the FTD device.
This configuration ensures that traffic to known cryptomining networks is blocked, enhancing the network’s security posture against cryptomining threats.
References: Cisco Secure Firewall Management Center Configuration Guide, Chapter on Security Intelligence.

NO.90 An engineer configures an access control rule that deploys file policy configurations to security zone or tunnel zones, and it causes the device to restart. What is the reason for the restart?

 Source or destination security zones in the access control rule matches the security zones that are associated with interfaces on the target devices.

 The source tunnel zone in the rule does not match a tunnel zone that is assigned to a tunnel rule in the destination policy.

 Source or destination security zones in the source tunnel zone do not match the security zones that are associated with interfaces on the target devices.

 The source tunnel zone in the rule does not match a tunnel zone that is assigned to a tunnel rule in the source policy.

Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/623/configuration/guide/fpmc-config-guide-v623/policy_management.html

NO.91 Network users are experiencing Intermittent issues with internet access. An engineer ident med mat the issue Is being caused by NAT exhaustion. How must the engineer change the dynamic NAT configuration to provide internet access for more users without running out of resources?

 Define an additional static NAT for the network object in use.

 Configure fallthrough to interface PAT on ‘he Advanced tab.

 Convert the dynamic auto NAT rule to dynamic manual NAT.

 Add an identity NAT rule to handle the overflow of users.

Explanation
Fallthrough to interface PAT is a feature that allows the dynamic NAT configuration to use the interface IP address as a last resort when the NAT pool is exhausted. This way, more users can access the internet without running out of resources. To enable this feature, the engineer must check the Enable PAT Fallback check box on the Advanced tab of the NAT rule editor1

NO.92 Which report template field format is available in Cisco FMC?

 box lever chart

 arrow chart

 bar chart

 benchmark chart

NO.93 In which two places can thresholding settings be configured? (Choose two.)

 on each IPS rule

 globally, within the network analysis policy

 globally, per intrusion policy

 on each access control rule

 per preprocessor, within the network analysis policy

NO.94 An administrator is creating interface objects to better segment their network but is having trouble adding interfaces to the objects. What is the reason for this failure?

 The interfaces are being used for NAT for multiple networks.

 The administrator is adding interfaces of multiple types.

 The administrator is adding an interface that is in multiple zones.

 The interfaces belong to multiple interface groups.

https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guide-v62/reusable_objects.html#ID-2243-000009b4
“All interfaces in an interface object must be of the same type: all inline, passive, switched, routed, or ASA FirePOWER. After you create an interface object, you cannot change the type of interfaces it contains.”

NO.95 Which two OSPF routing features are configured in Cisco FMC and propagated to Cisco FTD? (Choose two.)

 OSPFv2 with IPv6 capabilities

 virtual links

 SHA authentication to OSPF packets

 area boundary router type 1 LSA filtering

 MD5 authentication to OSPF packets

Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guide-v62/ospf_for_firepower_threat_defense.html

NO.96 Which command is run on an FTD unit to associate the unit to an FMC manager that is at IP address
10.0.0.10, and that has the registration key Cisco123?

 configure manager local 10.0.0.10 Cisco123

 configure manager add Cisco123 10.0.0.10

 configure manager local Cisco123 10.0.0.10

 configure manager add 10.0.0.10 Cisco123

Section: Configuration
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/misc/fmc-ftd-mgmt-nw/fmc-ftd-mgmt- nw.html#id_106101

NO.97 An engineer must export a packet capture from Cisco Secure Firewall Management Center to assist in troubleshooting an issue an a Secure Firewall Threat Defense device. When the engineer navigates to URL for Secure Firewall Management Center at:
..<FMC IP>/capture/CAP/pcap/sample.pcap
An engineer receives a 403: Forbidden error instead of being provided with the PCAP file. Which action resolves the issue?

 Disable the HTTPS server and use HTTP.

 Enable the proxy setting in the device platform policy.

 Enable HTTPS in the device platform policy.

 Disable the proxy setting on the client browser.

If an engineer receives a 403: Forbidden error when attempting to download a packet capture file from Cisco Secure Firewall Management Center (FMC), the issue is likely due to HTTPS not being enabled in the device platform policy. To resolve this issue, the engineer must enable HTTPS in the platform policy.
Steps:
* In FMC, navigate to Policies > Device Management > Platform Settings.
* Edit the relevant platform policy.
* Enable HTTPS for the device.
* Deploy the changes to the FTD device.
This ensures that the FMC and FTD device can securely transfer the packet capture file over HTTPS, resolving the 403 error.
References: Cisco Secure Firewall Management Center Administrator Guide, Chapter on Platform Settings and HTTPS Configuration.

NO.98 An administrator must use Cisco FMC to install a backup route within the Cisco FTD to route traffic in case of a routing failure with the primary route. Which action accomplishes this task?

 Install the static backup route and modify the metric to be less than the primary route.

 Configure EIGRP routing on the FMC to ensure that dynamic routes are always updated.

 Use a default route on the FMC instead of having multiple routes contending for priority.

 Create the backup route and use route tracking on both routes to a destination IP address in the network.

NO.99 A company is in the process of deploying intrusion protection with Cisco FTDs managed by a Cisco FMC.
Which action must be selected to enable fewer rules detect only critical conditions and avoid false positives?

 Connectivity Over Security

 Balanced Security and Connectivity

 Maximum Detection

 No Rules Active

 Loading …

Earn Quick And Easy Success With 300-710 Dumps: https://www.trainingdump.com/Cisco/300-710-practice-exam-dumps.html

CCNP Enterprise Certification 350-401 Sample Questions Reliable

Prepare for the Actual CCNP Enterprise 350-401 Exam Practice Materials Collection

Ace Cisco 350-401 Certification with Actual Questions Jun 27, 2024 Updated: https://www.trainingdump.com/Cisco/350-401-practice-exam-dumps.html

[Apr-2024] CCDE v3.0 400-007 Exam Practice Test Questions Dumps Bundle!

2024 Updated 400-007 PDF for the 400-007 Tests Free Updated Today!

Fully Updated Dumps PDF – Latest 400-007 Exam Questions and Answers: https://www.trainingdump.com/Cisco/400-007-practice-exam-dumps.html

Cisco 200-901 Exam Prep Guide: Prep guide for the 200-901 Exam

2024 New Preparation Guide of Cisco 200-901 Exam

Cisco 200-901 exam is intended for IT professionals who have foundational knowledge of network and software engineering concepts and are looking to expand their skills and knowledge in these areas. 200-901 exam is also suitable for individuals who are interested in pursuing a career in software development or network engineering, as it provides a solid foundation in both areas.

Cisco 200-901 DevNet Associate Exam covers a wide range of topics, including software development fundamentals, networking fundamentals, APIs, Cisco platforms and development, application deployment and security, and infrastructure and automation. 200-901 exam consists of 120 questions that you must complete within 120 minutes. You can take the exam online or at a Pearson VUE testing center.

Latest Questions 200-901 Guide to Prepare Free Practice Tests: https://www.trainingdump.com/Cisco/200-901-practice-exam-dumps.html

350-901 Dumps PDF 2024 Strategy Your Preparation Efficiently

Latest Verified & Correct Cisco 350-901 Questions

350-901 PDF Dumps Are Helpful To produce Your Dreams Correct QA’s: https://www.trainingdump.com/Cisco/350-901-practice-exam-dumps.html

Get instant access to 200-901 Practice Tests 2023 Free Updated Today!

Welcome to download the newest PassLeader 200-901 PDF dumps ( 405 Q&As)

Dec-2023 Latest TrainingDump 200-901 Exam Dumps with PDF and Exam Engine: https://www.trainingdump.com/Cisco/200-901-practice-exam-dumps.html

2023 700-765 dumps review – Professional Quiz Study Materials

700-765 Test Prep Training Practice Exam Questions Practice Tests

Books and Study Guides

Another way to quickly prepare for the official test is by getting the best and accurate guides for 700-765 from Amazon. Some of the learning materials and books that can help include:

• IoT and Edge Computing for Architects: Implementing edge and IoT systems from sensors to clouds with communication systems, analytics, and security, 2nd Edition by Perry Lea

  As IoT security is part of 700-765 exam, you need to know how to master this extensive notion. And this is where such a helpful IoT guide comes to your rescue. Written by an experienced IT author, such a manual targets to embrace all existing IoT technologies in order to augment expenses for operations, the life of products, and the overall well-being of people. Particularly, a guide like this is centered on various solutions ranging from IoT sensors to the overwhelming cloud. Also, it checks your knowledge of mesh networks, statistical analysis, learning models, IoT security, the shell one, and cryptography. Finally, such a manual will equip you with a solid knowledge of IoT architecture as well as how to put into operation best practices aiming to enable security, scalability, and reliability. So, if you want to tackle the Cisco 700-765 test in one try, then you need to avail yourself of this handbook from Amazon at a maximum of around $45.

• Cisco Firepower Threat Defense (FTD): Configuration and Troubleshooting Best Practices for the Next-Generation Firewall (NGFW), 1st Edition by Rajib Nazmul

  If you want to hone your skills in Firepower Threat Defense and its related features, which are all a portion of the Cisco 700-765 test, then this book is a way to go. Compiled by a senior engineer, this manual covers the deployment, troubleshooting, and tuning of FTD. Besides, in it, you’ll come across such helpful means as flowcharts, diagrams, and definitions to retain the information better. So, don’t wait anymore and get this Amazon book for just $35.20 as a paperback and become a master of the ASA components and Firepower NGFW & NGIPS, which are crucial for 700-765 excellence.

• Zero Trust Networks: Building Secure Systems in Untrusted Networks, 1st Edition by Evan Gilman and Doug Barth

  Zero trust is one of the key topics under the Cisco ASAESE 700-765 test. The Zero Trust Networks book is written with much detail on how a candidate can guard and offer solutions to protect network systems. It also helps one to have strong skills and knowledge in encryption, authentication, and authorization skills. In any system, these are the primary goals to ensure the safety of data. In addition, the guide offers knowledge of how to protect, use the available tool to provide security, understand how zero-trust network models embed security, and many other related factors. All in all, you can purchase this book from Amazon in the Kindle and paperback formats for just about $11-$32.

Exam Questions Answers Braindumps 700-765 Exam Dumps PDF Questions: https://www.trainingdump.com/Cisco/700-765-practice-exam-dumps.html

Valid 200-901 Test Answers & Cisco 200-901 Exam PDF

Cisco 200-901 Certification Real 2023 Mock Exam

What are the methods for passing Cisco DevNet Associate Exam v1.0 (200-901) Exam

There are three methods to attempt the DevNet Associate Exam v1.0 (200-901) Exam.

• Direct method
• Accomplished method
• Indirect method

How to approach Cisco DevNet Associate Exam v1.0 (200-901) Exam in the indirect method?

In the indirect method, you can approach Cisco DevNet Associate Exam v1.0 (200-901) Exam by offline practice with the help of Cisco 200-901 exam dumps and Cisco exam topics. Fulfillment is one of the many things that needs to be considered while you are preparing for this exam. Effectively and efficiently preparing is very much important. Evaluate the ability of the person is also very much important. Failed attempts are also helpful in preparing for the DevNet Associate Exam v1.0 (200-901) exam. You can use various methods to prepare for this Cisco certification exam. Evaluate the Cisco exam types are also very much important. This will help you in achieving your goals. Status is also one of the aspects that will help you in preparing for this exam. Tracking your progress is very much important. Actual experience is also helpful. Learned lessons are also helpful for this exam.

Assistants, Developers, Security Analyst and Network Administrators have to declare their interest in the DevNet Associate Exam v1.0 (200-901) Exam before May 25, 2017. After declaring their interest in the Cisco exam they have to attend a certain number of meetings. Majority is the criteria used to select the people who will be allowed to appear in the DevNet Associate Exam v1.0 (200-901) Exam. Acknowledge is the first phase of the DevNet Associate Exam v1.0 (200-901) Exam. Subjects from which you have to prepare are also very much important. Subjects from which you have to prepare for this exam are also very much important. Agreement is one of the aspects that will help you in preparing for the Cisco certification exam. Calendar is also one of the aspects that need to be considered while you are preparing for this exam.

200-901 Exam Questions and Valid 200-901 Dumps PDF: https://www.trainingdump.com/Cisco/200-901-practice-exam-dumps.html

Achive your Success with Latest Cisco 500-444 Exam [Feb 07, 2023]

The 500-444 Exam Test For Brief Preparation 

Cisco 500-444 Exam Syllabus Topics:

Revolutionary Guide To Exam Cisco Dumps: https://www.trainingdump.com/Cisco/500-444-practice-exam-dumps.html

Free Jan-2023 700-765 Certification Sample Questions certification Exam

Certification Topics of 700-765 Exam PDF Recently Updated Questions

The exam syllabus is what you should explore before taking the 700-765 test. Therefore, a potential candidate needs to learn the following topics and subtopics to succeed:

• IoT Security

  The next 10% of the content is covered by this topic that is all about IoT security. To be able to deal with the questions from this area, an applicant should know how to identify the IoT solutions critical to the business as well as the components of Cisco IoT security. Also, you should be able to determine the evolution of IoT security and need for it as well as know about Cisco IoT Security solutions and layered protection.

• Visibility & Enforcement

  You need to be ready that this part will cover about 15% of the entire content. Therefore, you need to have the skills in identifying solutions for Visibility & Enforcement as well as elements of AnyConnect, ISE, TrustSec, and Duo.

• Network Security

  Other 10% contain the details of the identification of solutions for NGFW & NGIPS, elements of ASA, features of Cisco Firepower Threat Defense, and features & management of Meraki MX.

• Advanced Threat

  The remaining 15% of the exam content will measure one’s level of expertise in identifying solutions for Advanced Threat. This module also includes the information about the elements of Advanced Malware Protection, ThreatGrid, Cognitive Intelligence, and Stealthwatch.

• Cisco Zero Trust

  As for this domain, about 10% of the questions will be about the value of trust-centric security & drivers for it as well as the value of zero trust. An individual should have the skills in identifying zero-trust solutions and Cisco Zero Trust outcomes.

Cisco 700-765 Certification Test Overview

The Cisco Advanced Security Architecture for System Engineers Exam (700-765) is processed, timed, and delivered in a secure environment. Before taking any Cisco certification exam, applicants must accept the Cisco certification and Confidentiality Agreement online at the approved testing center. There is a degree of flexibility on the part of Cisco with all studies provided to investigate various subjects. That means understanding much of the 700-765 content is needed since it measures several matters randomly. The Cisco 700-765 test is 90 minutes long. Plus, candidates will have to master such concepts as security glitches, the landscape of threats, IoT security facets, Zero Trust of Cisco, the portfolio for security Cisco solutions, networking security, and advanced threats.

Conclusion

Multiple organizations and firms prefer employees with a vital designation like the Cisco Advanced Security Architecture, as it helps them in the security architecture and systems management. This secures their business against cyber threats and also helps strengthen their system protection techniques. Therefore, the attainment of this certificate by nailing 700-765 test can give you the experience necessary in providing data protection and the required qualifications to land your dream job.

2023 New Preparation Guide of Cisco 700-765 Exam: https://www.trainingdump.com/Cisco/700-765-practice-exam-dumps.html