A10 Networks - Latest Training Dumps

(2023) PASS A10-System-Administration Exam Free Practice Test with 100% Accurate Answers

A10-System-Administration dumps Free Test Engine Verified By It Certified Experts

NO.17 You are planning an Active-Active-Active VRRP-A three-device deployment that, upon failover of any device, distributes the load from a single device to both standby devices simultaneously. How many VRIDs are required?

VRID Default is enough

NO.18 Select two aXAPI implementation use cases. (Choose two.)

Auto-syncing the configurations via virtual chassis.

Extract ACOS configurations or statistics from ACOS.

Perform deep packet inspection on traffic and redirect and modify content.

Writing scripts to automate configuration changes.

NO.19 Which statement describes the following configuration?
ACOS(config)# smtp 10.10.10.5
ACOS(config)# logging email emergency
ACOS(config)# logging email-address [email protected]

Send logs related to 10.10.10.5 to email address [email protected].

The ACOS device is configured to send log messages by email.

The ACOS administrator’s email is [email protected] where SNMP traps will be sent.

The ACOS device is configured to act as SMTP server to forward logging messages for other devices.

NO.20 In the following configuration:

Where network 3.0.0.x on each device is on a VE interface dedicated to aVCS traffic, what must you do to ensure that command “device-context x” always succeeds?

Verify the interface is untagged on each device.

Enable management service ssh on that interface for each device.

Configure vcs floating-ip on network 3.0.0.0 /24.

Apply acl “permit 3.0.0.0 /24” on that interface for each device.

NO.21 ACOS can log the following accounting records for administrative sessions:

device access attempts only

syslog errors of a specified severity level

device access and command entry attempts

command entry attempts only

syslog errors of severity greater than a specified level

NO.22 Given the following VRID 2 configuration, which device will host the VRID after the three devices at the same time?

Device 2

Device 1

VCS will randomly assign the VRID to a device based on the uptime of the device.

Device 3

The VRID will be hosted on all three devices at the same time.

NO.23 Describe VRRP-A (high availability) and aVCS interoperability.

Enabling VRRP-A requires that aVCS is operational

Enabling aVCS require VRRP-A is operational

VRRP-A and aVCS operate independently of each other

VRRP-A and aVCS must function simultaneously

NO.24 Which statement correctly describes the result of the following commands?
ACOS(config)#logging host 192.168.216.45
ACOs(config)#end
ACOS#active-partition p1
Currently active partition: p1
ACOS[p1](config)#logging host 2.2.2.2
ACOS[p1](config)#logging host partition shared

System logs generated from partition “p1” will be sent to logging server “2.2.2.2”, and only warning severity log messages are sent to the shared logging server’s “192.168.216.45”.

System logs generated from partition “p1” will be sent to logging server “2.2.2.2”, as well as to the shared logging server’s “192.168.216.45”.

System logs generated from partition “p1” will be sent to logging server “2.2.2.2”.

System logs generated from partition “p1” will be sent to the shared logging server’s “192.168.216.45”.

NO.25 You upgraded the boot image and changed the boot pointer to the new image using bootimage command.
Which of the following operations will load the new image?

reload

restore

system-reset

shutdown -r

restart

reboot

NO.26 When VRRP-A is enabled on a device with multiple partitions, which statement about VRID 0 is correct?

Each partition has its own distinct VRID 0.

VRID 0 only exists in the shared partition; private partitions can only contain VRIDs numbered higher than 0.

VRID 0 is initially enabled only in the shared partition; partition administrators can enable VRID 0 in their partitions.

When using VRRP-A on a device with multiple partitions, VRID 0 is automatically disabled.

NO.27 Given the following configuration, which statement describes Alice’s partition access rights?

Alice can access the partitions alpha and beta partition, but not the shared partition.

Alice can access the partitions alpha, beta, as well as the shared partition.

Alice can access either the alpha or beta partitions, but cannot access them both.

Alice can access the shared partition provided she is not currently accessing the alpha or beta partition.

NO.28 When vBlade A issues a “vcs vmaster-take-over 200” command, which statement is true?

The command is ignored when the current vMaster is in vMaster maintenance mode.

Any subsequent vmaster-take-over command within the chassis with a parameter smaller than 201 is ignored.

The 200 priority is compared to the current vmaster’s default vrid priority to determine which device controls the chassis.

If an administrator on vBlade B were to simultaneously issue command vcs vmaster-take-over 210, vBlade B would become the vMaster.

Loading …

Latest A10 Networks A10-System-Administration Practice Test Questions: https://www.trainingdump.com/A10-Networks/A10-System-Administration-practice-exam-dumps.html

Category A10 Networks

(2023) PASS A10-System-Administration Exam Free Practice Test with 100% Accurate Answers [Q17-Q39]