HPE6-A71 Questions Pass on Your First Attempt Dumps for Aruba-ACMP Certified [Q93-Q111]

NEW QUESTION 93
An administrator supports a RAP to abranch office. Employees at the branch office connect to an employee SSID that allows for split tunneling of the employee traffic. The RAP initially connects to the corporate office controller, but later loses connectivity to it.
Which operating mode should the administrator configure for a secondary SSID to be advertised during the loss of connectivity?

NEW QUESTION 94
A network of Mobility Controllers (MCs) is managed by a Mobility Master (MM). An administrator misconfigures the IP addressing on an MC and the MC loses connectivity to the MM.
How should the administrator fix this problem?

NEW QUESTION 95
An administrator needs to support Unified Communications and Collaboration (UCC) in a company’s network. The network infrastructure requires the OpenFlow protocol to support SDN-capable applications.
Which controller topology meets these requirements?

NEW QUESTION 96
A guest establishes an authenticated wireless session to an ArubaMobility Controller (MC). The controller uses a ClearPass server for all AAA functions.
Which AAA component disconnects the user when the guest exceeds their allowed duration?

NEW QUESTION 97
Refer to the exhibit.

An administrator implements the MultiZone feature. The administrator sets up five zones as shown in the exhibit.
* Zone A has six controllers that form a cluster.
* Zone B has three controllers that form a cluster.
* Zones C, D, and E have a single standalone controller each.
A total of 13 VAPs are created across the five zones. A zone needs to accept RAP connections from branch offices. All zones have the same AP Group name. One of the zones will not accept connections from the MultiZone APs.
What could be a cause of this problem?

NEW QUESTION 98
An administrator needs toauthenticate users connected to an ArubaOS-Switch. The Aruba Mobility Controller (MC) authenticates the user and assigns user roles to wired users.
Which mode should the administrator configure on the MC?

NEW QUESTION 99
Refer to the exhibit.

An administrator supports a RAP at a branch office shown in the exhibit. The company has one Mobility Controller (MC) at the Primary DMZ site and one at the Secondary DMZ site. The RAP is configured to connect to only the MC at the Primary DMZ site. A network outage with the ISP at the Primary DMZ site causes the RAP to reboot. Upon reboot, the RAP cannot build a tunnel to the Secondary DMZ site MC because the administrator forgot to addthe Second LMS IP address to the AP Group configuration. Once the RAP can successfully connect, the administrator can add the Secondary DMZ MC as a backup LMS to fix the AP Group.
What should the administrator implement to allow the RAP to connect tothe MC at the Secondary DMZ site while the outage at the primary site persists?

NEW QUESTION 100
Which device can terminate to a cluster of Aruba Mobility Controllers (MCs) that run ArubaOS 8.x?

NEW QUESTION 101
An administrator stages an AP and re-provisions it as a RAP from the Mobility Master (MM). When re-provisioning the RAP, the administrator must enter a user’s credentials. What is the purpose of these credentials?

NEW QUESTION 102
An administrator implements machine authentication in an 802.1X profile. Which user role will be assigned to the user’s session if machine authentication passes, but the 802.1X user authentication fails for auser who connects?

NEW QUESTION 103
Refer to the exhibit.

Two Aruba Mobility Controllers (MC) are managed by a Mobility Master (MM) in a non-cluster deployment as shown in the exhibit.
* The C1 controller is connected to AP1 and AP2.
* The C2controller is connected to AP3 and AP4.
* VLAN mobility is enabled in the VAPs of both AP Groups.
* Both C1 and C2 support the same VLANs.
* User1’s wireless device supports BSS Fast Transitioning and is currently connected to AP1.
What happens if User1 roamsacross the network and the user’s device associates to AP3?

NEW QUESTION 104
Refer to the exhibit.

Controllers are configured in a cluster as shown in the exhibit. These are the network details.
-A Mobility Master (MM) managers the cluster.
-The cluster contains two controllers: C1 and C2.
-AP1 and AP2 use C1 as their Active AP Anchor Controller (A-AAC), with C2 as their Standby AAC (S-AAC).
-AP3 and AP4 use C2 as their A-AAC with, C1 as their S-AAC.
User1 establishes a wireless connection via AP1, where the Active User Controller (U-UAC) assigned is C1, with C2 as the standby. What happens when User1 roams the wireless network and eventually their session is handled by AP3?

NEW QUESTION 105
Which IEEE standard should user devices support to implement Fast BSS Transition when a network implements wireless roaming (mobility)?

NEW QUESTION 106
An administrator implements machine authentication in an 802.1X profile. Which user role will be assigned to the user’s session if machine authentication fails, but the 802.1X user authentication passes for a user who connects?

NEW QUESTION 107
Refer to theexhibit.

An administrator configures a split-tunnel policy to be used by RAPs at branch offices. Under the Configuration section on the Mobility master (MM) shown in the exhibit, where should the administrator configure the split-tunnel mode sothat it can be deployed to the RAPs?

NEW QUESTION 108
An AP connects to a controller. Then, the AP loses power and reboots.
Which parameters will the AP remember and use from its initial connection? (Selecttwo.)

NEW QUESTION 109
Refer to the exhibit.

What can an administrator determine from this Aruba device output?

NEW QUESTION 110
A VIA client tries to initially connect to corporate office controller through an intermediate firewall. However, the VPN connection fails. The administrator examines the firewall rules and determines that rules for UDP
4500 and UDP 500 are configured.
Which additional protocol must be allowed in the firewall rules to resolve this connection failure?

NEW QUESTION 111
Refer to the exhibit.

An administrator configures a cluster with only the members shown in the exhibit. AP load balancing is enabled. There are no other cluster parameters configured. What occurs when a cluster member experiences a failure?