NCS-Core Exam Questions – Real & Updated Questions PDF [Q10-Q32]

NO.10 A consultant creates a four-node AHV cluster with two 1GbE (eth0, etc1) and two 10GbE (eth2, eth3) NICs per node. The 1GbE NICs will not be placed into service, but the customer wants the network to be preconfigured for their eventual use.
The consultant removes the 1GbE NIC from the default bond and creates a second bridge(br1), but is unable to add the 1GbE NIC using the below command:
manage_ovs -bridge_name br1 -interfaces 1g -bond_name br1-up update_uplinks Which parameter is missing from this command?

NO.11 A consultant is deploying a Nutanix cluster at a customer location. The consultant will be deploying the latest AOS along with the latest Nutanix hardware.
Which three references should the consultant review prior to this installation? (Choose three.)

NO.12 Refer to the exhibit.

What is the purpose of eth2 on the CVMs?

NO.13 A consultant configures a Nutanix cluster and integrates the hosts into vCenter using VMware best practices.
The customer has requested that the Nutanix cluster only have a single datastore.
Upon configuring the cluster per the customer requirements, vCenter displays an alert regarding the heartbeat datastore. The consultant adds the das.ignoreInsufficientHbDatastore value = true rule. The container can be seen from each host, but the alert remains active.
What should the consultant do to resolve this issue?

NO.14 A consultant is planning an installation and needs to collect configuration items to be used during the install.
The data needed from the customer are IP addresses, Gateway, DNS servers, and NTP Servers.
Which Cluster Deployment document must be completed with the customer?

NO.15 A customer needs to meet the following requirements for their business critical application:
* SQL Servers must be on specific hosts to lower licensing costs.
* Oracle RAC servers must be on separate hosts for licensing reasons
Which policy or policies should be implemented to meet these requirements?

NO.16 Over the period of 2 to 3 weeks, a cluster displays the following:
*Periods where Warning Alerts of memory usage over 75% are asserted
*Periods where Critical Warnings of memory usage over 90% are asserted
*Periods of slow of frozen VDI desktops have caused work stoppage or slowdown
*VDI clones have periodically not powered up when called, causing work stoppage Which steps should be used toprioritize the administrator’s troubleshooting efforts?

NO.17 A three-node cluster has a Nutanix Files instance with three FSVMs.
What happens after a node failure?

NO.18 A customer wants to run SAP HANA on a Nutanix cluster with the following characteristics:
* AHV nodes
* SAP HANA version 2
* Production database files
Which configuration should be recommended to the customer?

NO.19 A consultant needs to review a customer’s switch port configuration to identify any issues. Other customer requirements are as follows:
* Leverage LACP
* Native VLAN will not be used
* Use Multiple Upstream switches
* Use VLANs 20-25 and 30
* LACP Fallback has been Enabled
* vPC or MLAG has been configured
What must be included in a configuration in order to meet these requirements?

NO.20 Where can a consultant find Nutanix Enablement Starter Packs (ESPs)?

NO.21 Refer to the exhibits.

A consultant is trying to test port failover on the node shown in the first exhibit. A continuous ping test is performed to the host. The consultant shuts down one of the links, after which the host ping request times out.
The consultant tries to troubleshoot the issue with the customer and sees the information shown in the second exhibit on their Cisco Switches:

What is causing the issue?

NO.22 A guest VM is reported to have poor storage performance. It has an I/O profile of 80%read. 20% write, and the HDDs form more than 50% of the read source.
What should an administrator do to resolve this issue?

NO.23 An administrator is concerned that Prism will be inaccessible if Active Directory is unable to process logins.
Which method should the administrator use to access the cluster in the event of this type of outage?

NO.24 An administrator configure Active Directory (AD) authentication for their Nutanix environment. When login in using an AD user account, the login process takes more than one minute to complete. No delay occurs when logging a local account.
What should the administrator confirm to resolve this issue?

NO.25 A consultant is viewing an ESXi host via console without external network connectivity.
Which two IP addresses can be used to connect to the CVM (Choose two.)

NO.26 After a consultant runs Foundation, the imaging process fails.
In which two locations can the consultant find the logs? (Choose two.)

NO.27 In a 20-node ESXi deployment, the customer needs additional resiliency to survive the loss of two nodes concurrently.
Which configuration should the consultant use to ensure that the appropriate resources are available?

NO.28 An administrator is deploying several new application VMs to a Nutanix cluster. The application is very transactional with a 28/72 random, read/write ratio.
What should the administrator do?

NO.29 An administrator receives an error indicating that the CVMs in the cluster are not syncing to any NTP servers.
An investigation of the issue finds:
* The NTP servers are configured in Prism
* The time on all CVMs is the same
* Both the CVMs and AHV hosts are configured for the UTC time zone
Which two steps can be taken to troubleshoot this issue? (Choose two.)

NO.30 Refer to the exhibit.

An administrator logged into Prism Element, notices the following in the home dashboard, and showing the exhibit.
Which action should the administrator take next?

NO.31 A VDI environment based on AHV Cluster is not performing well. The current environment isusing only one bridge (Bridge0). The administrator needs to verify if nodes are using all network cards associated to Bridge0.
Which two menus should be used to check the current configuration? (Choose two.)

NO.32 After the migration, some SQL queries take longer to execute than prior to migration.
The following SQL best practices were applied while creating the SQL VM on Nutanix:
*8 vDisks per SQL server VM
*Database and Log files on separate vDisk
*2 TempDB database drives and 1 TempDB log drive
What should the administrator to do improve the SQL Server performance?