EDGE - Latest Training Dumps

질문 10
Which of the following BEST describes an EDGE Expert?

A consultant who can issue a preliminary EDGE certificate

An individual accredited by the EDGE Certifier who can serve as a consultant

An individual who can serve as both an auditor and a consultant upon EDGE Committee approval

An individual accredited by the EDGE Operations and Management Team who can serve as a consultant

The role of an EDGE Expert is well-defined within the EDGE framework to clarify their responsibilities and qualifications. The EDGE Expert and Auditor Protocols provide a precise description: “An EDGE Expert is an individual accredited by the EDGE Certifier (such as GBCI or other authorized certification bodies) who can serve as a consultant to project teams, advising on the selection of green building measures, preparing the self-assessment in the EDGE software, and guiding the project toward certification” (EDGE Expert and Auditor Protocols, Section 2.1: Roles of EDGE Expert). Option B, an individual accredited by the EDGE Certifier who can serve as a consultant, directly matches this definition. Option A (a consultant who can issue a preliminary EDGE certificate) is incorrect, as Experts do not issue certificates: “Only the EDGE Certification Provider can issue a preliminary certificate, not the EDGE Expert” (EDGE Certification Protocol, Section 3.3: Certification Decision). Option C (an individual who can serve as both an auditor and a consultant upon EDGE Committee approval) is also incorrect, as this violates conflict-of-interest rules: “An individual cannot serve as both an EDGE Expert and Auditor on the same project, even with committee approval, to avoid conflicts of interest” (EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest). Option D (an individual accredited by the EDGE Operations and Management Team) is wrong, as accreditation is handled by the Certifier, not the Operations team: “The EDGE Operations and Management Team oversees the program, while accreditation of Experts is managed by the EDGE Certifier” (EDGE Certification Protocol, Section 1.3: Program Structure). The EDGE User Guide further supports this: “EDGE Experts are accredited professionals who consult on projects, having passed the EDGE Expert exam administered through the Certifier” (EDGE User Guide, Section 6.4: Working with EDGE Experts). Thus, Option B best describes an EDGE Expert.
Reference:EDGE Expert and Auditor Protocols, Section 2.1: Roles of EDGE Expert, Section 2.3: Conflict of Interest; EDGE Certification Protocol, Section 3.3: Certification Decision, Section 1.3: Program Structure; EDGE User Guide Version 2.1, Section 6.4: Working with EDGE Experts.

질문 11
Which of the following is NOT an option for insulation in materials efficiency measures?

Mineral wool

Polyurethane

Polypropylene

Polystyrene

질문 12
Which of the following describes a more efficient lamp?

More lumens/watt

Lower watts/m²

Longer life

Lower wattage

질문 13
A building is located in a hot and dry climate where water availability (rainfall) is low. Which of the following measures will give the lowest water savings?

Low-flow showers

Rainwater harvesting

Recycle black water

Dual flush for water closets

In a hot and dry climate with low rainfall, water efficiency measures in EDGE are evaluated based on their potential to reduce potable water demand, but their effectiveness depends on local conditions. The EDGE User Guide explains the impact of various water-saving measures: “In regions with low rainfall, rainwater harvesting provides minimal water savings due to limited precipitation, whereas measures like low-flow showers, dual flush toilets, and black water recycling can achieve consistent savings by reducing direct water use or reusing wastewater” (EDGE User Guide, Section 5.2: Water Efficiency Measures). Option B, rainwater harvesting, relies on rainfall to collect water for non-potable uses, but in a hot and dry climate with low water availability, its effectiveness is limited: “Rainwater harvesting systems in EDGE are modeled based on local precipitation data. In arid climates with annual rainfall below 200 mm, savings from rainwater harvesting are typically less than 5% of total water demand, as the collected volume is insufficient to meet significant needs” (EDGE Methodology Report Version 2.0, Section 4.2: Water Savings Calculations). In contrast, Option A (low-flow showers) reduces water use directly: “Low-flow showers can reduce water consumption by 20-30% in buildings, regardless of climate, by limiting flow rates to 6-8 liters per minute” (EDGE User Guide, Section
5.2: Water Efficiency Measures). Option C (recycle black water) also offers consistent savings: “Black water recycling systems can save 30-40% of water demand by treating and reusing wastewater for flushing or irrigation, independent of rainfall” (EDGE Methodology Report Version 2.0, Section 4.2: Water Savings Calculations). Option D (dual flush for water closets) similarly provides reliable savings: “Dual flush toilets reduce water use by 25-35% by offering a low-flush option for liquid waste, effective in all climates” (EDGE User Guide, Section 5.2: Water Efficiency Measures). Given the low rainfall in a hot and dry climate, rainwater harvesting (Option B) yields the lowest water savings compared to the other measures, which do not depend on precipitation. The EDGE User Guide further notes: “In dry climates, measures like rainwater harvesting are often the least effective, while demand-side measures (e.g., low-flow fixtures) and recycling systems provide higher and more consistent water savings” (EDGE User Guide, Section 5.3: Additional Water Efficiency Measures). Thus, rainwater harvesting (Option B) gives the lowest water savings in this context.
Reference:EDGE User Guide Version 2.1, Section 5.2: Water Efficiency Measures, Section 5.3: Additional Water Efficiency Measures; EDGE Methodology Report Version 2.0, Section 4.2: Water Savings Calculations.

질문 14
A medium-rise building comprises retail on the first two floors with offices on succeeding floors (third to fifth). If one of the tenants on the third floor aims for EDGE certification, which building type should be used?

Office

리테일

Mixed-use

Core and Shell

The EDGE software requires users to select a building type (typology) to model resource consumption accurately, and the choice depends on the scope of the certification. In this scenario, a tenant on the third floor (an office floor) of a medium-rise building seeks EDGE certification. The EDGE User Guide provides guidance on selecting building types for tenant spaces: “When a tenant within a larger building seeks EDGE certification, the building type should reflect the tenant’s space. For an office tenant on the third floor of a mixed-use building, the ‘Office’ typology should be selected, as the certification applies only to the tenant’s space, not the entire building, unless the whole building is being certified” (EDGE User Guide, Section 2.2:
Project Setup). Option A, Office, aligns with this guidance, as the tenant’s space is an office. Option B (Retail) is incorrect, as the retail floors are on the first two levels, not the third: “Retail typology would apply if the tenant space were on the retail floors, not the office floors” (EDGE User Guide, Section 2.2: Project Setup). Option C (Mixed-use) is also incorrect, as this typology applies to the entire building, not a single tenant space: “Mixed-use typology is used when the entire building, including all uses (e.g., retail and offices), is being certified, not for individual tenant spaces” (EDGE Methodology Report Version 2.0, Section
2.1: Calculation Approach). Option D (Core and Shell) is typically used for buildings certified up to the core and shell stage, not for tenant fit-outs: “Core and Shell typology applies to buildings certified without tenant fit-outs, focusing on the building envelope and systems, not individual tenant spaces like an office” (EDGE Certification Protocol, Section 1.2: Scope of EDGE Standard). The EDGE User Guide further clarifies: “For tenant-led certifications, the typology should match the tenant’s use-e.g., ‘Office’ for an office tenant-even if the building has multiple uses, ensuring the Base Case reflects the tenant’s specific consumption patterns” (EDGE User Guide, Section 2.2: Project Setup). Since the tenant on the third floor operates an office, the Office typology (Option A) is the correct choice for EDGE certification.
Reference:EDGE User Guide Version 2.1, Section 2.2: Project Setup; EDGE Methodology Report Version
2.0, Section 2.1: Calculation Approach; EDGE Certification Protocol, Section 1.2: Scope of EDGE Standard.

질문 15
Which of the following heating systems uses Coefficient of Performance (COP) as a measure of efficiency in the EDGE software?

Electric heater

Condensing boiler

Ground source heat pump

Sensible heat recovery from exhaust air

질문 16
A building owner tells an EDGE Auditor that water-efficient faucets are in the building’s restrooms.
However, the specifications on the faucets are not provided. The Auditor should:

Exclude the faucets in question from the project.

Test the faucets’ flow rates to prove the water use and document the findings.

Require the building owner to replace the faucets as the audit needs the exact specification.

Find a product that has the same parameters as the building owner describes and upload this for evidence.

질문 17
For a project in a hot and dry climate with no air-conditioning system, which of the following will NOT have an impact on the occupants’ thermal comfort?

Ceiling fans

Solar shading

Wall and roof insulation

Solar photovoltaics

질문 18
Which of the following may NOT lead to a higher adoption of green building practices?

Green building regulations

Lower electricity supply costs

Public awareness and capacity building

Clear visibility of estimated savings and cost of green measures

Adoption of green building practices in EDGE is influenced by factors that incentivize or mandate resource efficiency. The EDGE User Guide discusses drivers for green building adoption: “Factors that lead to higher adoption of green building practices include green building regulations, which mandate compliance with efficiency standards; public awareness and capacity building, which educate stakeholders on the benefits of green design; and clear visibility of estimated savings and costs, which provide financial justification for green measures” (EDGE User Guide, Section 1.1: Introduction to EDGE). Option A (green building regulations) directly encourages adoption by enforcing standards: “Regulations requiring energy or water efficiency standards push developers to adopt green practices to meet legal requirements” (EDGE Certification Protocol, Section 1.2: Scope of EDGE Standard). Option C (public awareness and capacity building) increases adoption by educating stakeholders: “Awareness campaigns and training programs increase demand for greenbuildings by informing developers, owners, and tenants of their benefits” (EDGE User Guide, Section 1.1: Introduction to EDGE). Option D (clear visibility of estimated savings and costs) incentivizes adoption by demonstrating financial benefits: “EDGE’s display of savings and payback periods motivates adoption by showing the return on investment for green measures” (EDGE User Guide, Section 2.4:
Interpreting EDGE Results). However, Option B (lower electricity supply costs) may not lead to higher adoption, as it reduces the financial incentive to save energy: “Lower electricity supply costs decrease the cost savings from energy efficiency measures, potentially discouraging investment in green practices, as the payback period for measures like insulation or efficient lighting becomes longer” (EDGE Methodology Report Version 2.0, Section 4.4: Cost Savings Calculations). The EDGE User Guide further elaborates: “High utility costs often drive green building adoption by making energy and water savings more financially attractive, whereas lower costs can reduce the urgency to implement efficiency measures” (EDGE User Guide, Section 1.2: Scope of EDGE Certification). In this context, lower electricity supply costs (Option B) may not encourage green building practices, as the economic motivation for energy savings diminishes.
Reference:EDGE User Guide Version 2.1, Section 1.1: Introduction to EDGE, Section 1.2: Scope of EDGE Certification, Section 2.4: Interpreting EDGE Results; EDGE Certification Protocol, Section 1.2: Scope of EDGE Standard; EDGE Methodology Report Version 2.0, Section 4.4: Cost Savings Calculations.

질문 19
Which type of evidence is required at the post-construction stage for the efficiency measure window glazing?

Design building elevations marking the window glass specifications

Bill of quantities with the specifications for the window glass highlighted

Manufacturer’s data sheets showing the make and model, U-value, and SHGC of the installed glass

Window schedule for the building showing the major window glass types if more than one type of glass is present

The post-construction stage in EDGE certification requires evidence to confirm that the efficiency measures claimed in the design stage have been implemented as specified. For window glazing, which affects energy efficiency through its U-value (thermal transmittance) and SHGC (Solar Heat Gain Coefficient), the EDGE Certification Protocol provides clear requirements: “At the post-construction stage, the Client must provide manufacturer’s data sheets for the window glazing measure, showing the make and model, U-value, and SHGC of the installed glass, to confirm that the glazing matches the specifications claimed in the self- assessment and meets the energy efficiency requirements” (EDGE Certification Protocol, Section 3.4: Post- Construction Requirements). Option C, manufacturer’s data sheets showing the make and model, U-value, and SHGC of the installed glass, directly matches this requirement, as it provides the specific technical data needed to verify compliance. Option A (design building elevations marking the window glass specifications) is relevant at the design stage, not post-construction: “Design elevations are required at the preliminary stage to show intended glazing specifications, not after construction” (EDGE Certification Protocol, Section 3.2:
Audit Requirements). Option B (bill of quantities with specifications highlighted) is insufficient on its own, as it may not provide detailed technical data: “Bills of quantities may support purchase verification, but manufacturer’s data sheets are required for technical specifications like U-value and SHGC” (EDGE Certification Protocol, Section 3.4: Post-Construction Requirements). Option D (window schedule showing major glass types) is helpful but not sufficient, as it lacks the detailed technical data: “Window schedules may indicate glass types, but they do not replace the need for manufacturer’s data sheets with U-value and SHGC at post-construction” (EDGE User Guide, Section 6.2: Documentation Requirements). The EDGE User Guide further clarifies: “For glazing measures, post-construction evidence must confirm the installed product’s performance through manufacturer’s data sheets, ensuring alignment with the design-stage claims” (EDGE User Guide, Section 4.1: Insulation Measures). Thus, manufacturer’s data sheets (Option C) are required at the post-construction stage.
Reference:EDGE Certification Protocol, Section 3.4: Post-Construction Requirements, Section 3.2: Audit Requirements; EDGE User Guide Version 2.1, Section 6.2: Documentation Requirements, Section 4.1:
Insulation Measures.

질문 20
Is it possible to be both the EDGE Expert and Auditor on a project?

No, an EDGE Expert cannot be the EDGE Auditor on the same project.

No, even if EDGE Certifier agrees to special terms to have no conflict of interest.

Yes, they can be both an EDGE Auditor and EDGE Expert in all cases.

Yes, but only in the case that there are no other EDGE Auditors available for the project.

The EDGE framework strictly enforces separation of roles to maintain integrity and avoid conflicts of interest during the certification process. The EDGE Expert and Auditor Protocols explicitly address this issue: “An individual cannot serve as both the EDGE Expert and EDGE Auditor on the same project. This separation ensures independence in the audit process, as the Expert’s role as a consultant advising the project team could bias the Auditor’s objective assessment of the project’s compliance with EDGE standards” (EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest). Option A, no, an EDGE Expert cannot be the EDGE Auditor on the same project, directly reflects this rule. Option B (no, even if the Certifier agrees to special terms) adds an unnecessary condition, as the protocols do not allow exceptions: “No exceptions are permitted for an individualto serve in both roles on the same project, regardless of agreements or special terms” (EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest). Option C (yes, in all cases) is incorrect, as it contradicts the conflict-of-interest rules: “Allowing dual roles in all cases would undermine the impartiality required for certification” (EDGE Certification Protocol, Section 3.1: Certification Process). Option D (yes, if no other Auditors are available) is also incorrect, as availability does not override the conflict-of-interest prohibition: “Even if no other Auditors are available, the roles must remain separate; the Client must find a different Auditor or delay the audit” (EDGE Expert and Auditor Protocols, Section 4.1: Audit Process). The EDGE User Guide reinforces this principle: “The separation of Expert and Auditor roles ensures a fair and unbiased certification process, protecting the credibility of EDGE certification” (EDGE User Guide, Section
6.4: Working with EDGE Experts). Thus, it is not possible to be both (Option A).
Reference:EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest, Section 4.1: Audit Process; EDGE Certification Protocol, Section 3.1: Certification Process; EDGE User Guide Version 2.1, Section 6.4:
Working with EDGE Experts.

질문 21
In a 3-star business hotel near the city center, which of the following elements of the building’s water use breakdown is/are likely to consume the most water?

Showers in guest rooms

Laundry

Toilets in lobby area

Faucets in guest rooms

Water consumption in hotels varies significantly based on usage patterns, with guest-related activities often dominating the water use breakdown. The EDGE User Guide provides detailed insights into water use in hotels: “In a typical 3-star business hotel, the largest contributor to water consumption is showers in guest rooms, accounting for approximately 40-50% of total water use due to frequent guest showers, especially in urban hotels with high occupancy. Laundry, toilets, and faucets also contribute, but to a lesser extent, with laundry at 15-20%, toilets at 10-15%, and faucets at 5-10%” (EDGE User Guide, Section 5.2: Water Efficiency Measures). Option A, showers in guest rooms, aligns with this breakdown as the element likely to consume the most water. Option B (laundry) is significant but lower than showers: “Laundry in 3-star hotels consumes less water than showers, as laundry is typically centralized and less frequent than daily guest showers” (EDGE Methodology Report Version 2.0, Section 4.2: Water Savings Calculations). Option C (toilets in lobby area) is a minor contributor, as lobby toilets serve fewer users compared to guest rooms:
“Toilets in public areas like the lobby have lower usage compared to guest room facilities, contributing only a small fraction of total water use in hotels” (EDGE User Guide, Section 5.2: Water Efficiency Measures).
Option D (faucets in guest rooms) also uses less water than showers: “Faucets in guest rooms, used for handwashing or brushing teeth, have lower flow rates and usage frequency compared to showers, which often run for 5-10 minutes per use” (EDGE Methodology Report Version 2.0, Section 4.2: Water Savings Calculations). The EDGE User Guide further elaborates: “In business hotels, showers dominate water use due to high occupancy and guest behavior, making measures like low-flow shower heads particularly effective for water savings” (EDGE User Guide, Section 5.2: Water Efficiency Measures). The EDGE Methodology Report adds: “For a 3-star hotel with 100 rooms and 70% occupancy, showers can account for 45 liters per guest per day, compared to 15 liters for laundry, 10 liters for toilets, and 5 liters for faucets, based on standard usage assumptions” (EDGE Methodology Report Version 2.0, Section 4.2: Water Savings Calculations).
Thus, showers in guest rooms (Option A) are likely to consume the most water in this context.
Reference:EDGE User Guide Version 2.1, Section 5.2: Water Efficiency Measures; EDGE Methodology Report Version 2.0, Section 4.2: Water Savings Calculations.

질문 22
Which of the following user roles is available in the EDGE App for an EDGE project team?

프로젝트 관리자

Project Architect

Project Engineer

Project Auditor

질문 23
The EDGE Preliminary Certificate is issued by the EDGE:

Auditor.

Expert.

Certification Provider.

Operations and Management Team.

질문 24
The Client informs an EDGE Auditor that a key member of the design team has resigned. The Client requests the Auditor to take the member’s place for the remainder of the project’s design development as it would provide the Auditor an opportunity to identify suitable green building measures, making audit tasks much simpler. What should the EDGE Auditor do?

Resign from the audit role on the basis that its position has been compromised by this direct approach by the Client.

Refer the Client to an associate within the organization who works in another department, but is qualified and available to carry out the work.

Accept the additional commission on the basis that this will save the Client time and money, and would reduce the volume of work required for the audit.

Refer the Client to an associate within the organization who will be working with the Auditor on the EDGE audit, since the Auditor organization has spare capacity.

The EDGE framework strictly prohibits Auditors from engaging in roles that could compromise their independence, such as providing design consultancy on the same project they are auditing. The EDGE Expert and Auditor Protocols address this scenario explicitly: “An EDGE Auditor must not accept any role in the design development of a project they are auditing, as this creates a conflict of interest by blurring the lines between consultancy and independent verification. If the Client requests the Auditor to take on a design role, the Auditor should decline and may refer the Client to another qualified professional who is not involved in the audit process” (EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest). Option B, refer the Client to an associate within the organization who works in another department, but is qualified and available to carry out the work, aligns with this guidance, as it maintains the Auditor’s independence while helping the Client find a suitable replacement. Option A (resign from the audit role) is an overreaction, as the request itself does not compromise the Auditor’s position unless accepted: “The Auditor is not required to resign unless they have already engaged in a conflicting role, which can be avoided by declining the request” (EDGE Expert and Auditor Protocols, Section 4.1: Audit Process). Option C (accept the additional commission) is unethical, as it violates conflict-of-interest rules: “Accepting a design role on a project being audited undermines the Auditor’s impartiality, as they would be auditing theirown work, which is strictly prohibited” (EDGE Certification Protocol, Section 3.1: Certification Process). Option D (refer the Client to an associate working with the Auditor on the EDGE audit) is also incorrect, as this associate is already involved in the audit, creating a potential conflict: “Referring the Client to someone involved in the same audit does not resolve the conflict of interest, as the audit team must remain independent from design activities” (EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest). The EDGE User Guide reinforces this principle: “Auditors must maintain strict separation from design roles to ensure an unbiased audit, and should assist the Client by referring them to independent professionals if needed” (EDGE User Guide, Section 6.5:
Working with EDGE Auditors). Thus, referring the Client to a qualified associate in another department (Option B) is the correct action.
Reference:EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest, Section 4.1: Audit Process; EDGE Certification Protocol, Section 3.1: Certification Process; EDGE User Guide Version 2.1, Section 6.5:
Working with EDGE Auditors.

질문 25
A potential EDGE Client is pursuing EDGE Zero Carbon certification for a museum. Which of the following statements is correct?

The project team can select any typology they consider applicable.

The building must be operating for at least 6 months at 75% occupancy.

The project cannot be certified because EDGE does not have a ‘museum’ typology.

The building must be operating for at least 12 months at 75% occupancy.

EDGE Zero Carbon certification, like all EDGE certifications, is limited to specific building typologies supported by the EDGE software, as these typologies have predefined usage patterns for accurate modeling.
The EDGE User Guide lists the supported typologies: “EDGE certification, including EDGE Zero Carbon, is available for the following building typologies: homes, hotels, offices, hospitals, retail, schools, warehouses, and light industry buildings. Museums are not a supported typology in EDGE, as their unique usage patterns, such as specialized HVAC for artifact preservation, are not modeled in the software” (EDGE User Guide, Section 1.2: Scope of EDGE Certification). Option C, the project cannot be certified because EDGE does not have a ‘museum’ typology, directly aligns with this limitation, as museums are not among the supported building types. Option A (the project team can select any typology they consider applicable) is incorrect, as EDGE requires the use of predefined typologies: “The EDGE software restricts typology selection to predefined categories to ensure accurate Base Case calculations; users cannot create custom typologies for unsupported building types like museums” (EDGE Methodology Report Version 2.0, Section 2.1: Calculation Approach). Option B (operating for at least 6 months at 75% occupancy) and Option D (operating for at least
12 months at 75% occupancy) address operational data requirements for EDGE Zero Carbon, but they are irrelevant if the typology is unsupported: “EDGE Zero Carbon certification requires at least 12 months of operational data at 75% occupancy to verify performance, but this applies only to supported typologies” (EDGE Certification Protocol, Section 2.3: Certification Levels). Since museums are not supported, the operational data requirement does not apply, making both B and D incorrect in this context. The EDGE Certification Protocol further confirms: “Buildings like museums, which are not part of EDGE’s typology list, cannot be certified, as the software cannot generate a Base Case for unsupported building types, ensuring consistency in certification standards” (EDGE Certification Protocol, Section 1.2: Scope of EDGE Standard).
The EDGE User Guide adds: “Clients pursuing certification for unsupported typologies, such as museums or cultural centers, will need to explore other green building certifications, as EDGE is not designed for these building types” (EDGE User Guide, Section 1.2: Scope of EDGE Certification). Thus, the project cannot be certified due to the lack of a museum typology (Option C).
Reference:EDGE User Guide Version 2.1, Section 1.2: Scope of EDGE Certification; EDGE Certification Protocol, Section 1.2: Scope of EDGE Standard, Section 2.3: Certification Levels; EDGE Methodology Report Version 2.0, Section 2.1: Calculation Approach.

질문 26
An EDGE Auditor has received initial documentation from a Client which implies that measures not selected on the downloaded PDF can be claimed. What should the Auditor do?

The Auditor should ask for advice from the EDGE Partner and then take action.

The Auditor should modify the self-assessment and submit the project for certification.

Inform the Client to update the EDGE software and prepare a new PDF.

As submission documents are correct, the Auditor should ignore the error on PDF.

The EDGE audit process requires that the documentation submitted by the Client accurately reflects the self- assessment in the EDGE software, ensuring consistency and transparency. The EDGE Expert and Auditor Protocols address discrepancies in documentation: “If an EDGE Auditor identifies a discrepancy between the submitted documentation and the self-assessment PDF, such as measures being claimed that were not selected in the EDGE software, the Auditor must inform the Client to update the EDGE software to reflect the correct measures and prepare a new PDF for submission. This ensures that the audit is based on an accurate representation of the project’s claims” (EDGE Expert and Auditor Protocols, Section 4.2: Evidence Verification). Option C, inform the Client to update the EDGE software and prepare a new PDF, directly aligns with this protocol, as it corrects the error at the source and ensures the self-assessment matches the claimed measures. Option A (ask for advice from the EDGE Partner) is unnecessary, as the protocol provides clear guidance: “Auditors are expected to follow standard procedures for discrepancies without needing to consult the EDGE Partner, unless the issue involves a policy interpretation beyond the protocols” (EDGE Expert and Auditor Protocols, Section 4.1: Audit Process). Option B (modify the self-assessment and submit) is unethical and prohibited, as Auditors cannot alter the Client’s submission: “The Auditor must not modify the Client’s self-assessment in the EDGE software, as this compromises the independence of the audit process; the Client is responsible for updating the assessment” (EDGE Certification Protocol, Section 3.2:
Audit Requirements). Option D (ignore the error on PDF) is also incorrect, as ignoring discrepancies violates audit integrity: “All discrepancies between the PDF and submitted documents must be resolved before the audit proceeds, as ignoring errors could lead to incorrect certification outcomes” (EDGE Expert and Auditor Protocols, Section 4.2: Evidence Verification). The EDGE User Guide further reinforces: “The self- assessment PDF must accurately reflect the measures selected in the EDGE software, and any mismatch requires the Client to revise the assessment to ensure a fair and transparent audit” (EDGE User Guide, Section
6.2: Documentation Requirements). Thus, the Auditor should inform the Client to update the software and prepare a new PDF (Option C).
Reference:EDGE Expert and Auditor Protocols, Section 4.2: Evidence Verification, Section 4.1: Audit Process; EDGE Certification Protocol, Section 3.2: Audit Requirements; EDGE User Guide Version 2.1, Section 6.2: Documentation Requirements.

질문 27
To claim efficiency measure Insulation for Cold Storage Envelope, which of the following documents is required as evidence at the preliminary certification stage?

Calculations of Coefficient of Performance (COP)

Drawing(s) showing the U-value specification of the cold storage envelope

Purchase receipts showing the U-value specification of the cold storage envelope

Manufacturer’s data sheets for the HVAC system

질문 28
Coefficient of Performance (COP) of the electrical chiller is defined as:

Thermal output / thermal input.

Thermal output / electrical input.

Electrical input / thermal output.

Electrical output / electrical input.

질문 29
The COP of the water-cooled chiller is 6, and the cooling thermal load is 3516 W. What is the power rating of the chiller?

586 W

3510 W

3522 W

21096 W

질문 30
Which type of evidence is required at the post-construction stage for the efficiency measure window glazing?

Bill of quantities with the specifications for the window glass highlighted

Manufacturer’s data sheets showing the make and model, U-value, and SHGC of the installed glass

Design building elevations marking the window glass specifications

Window schedule for the building showing the major window glass types if more than one type of glass is present

The post-construction stage in EDGE certification requires evidence to confirm that the efficiency measures claimed in the design stage have been implemented as specified. For window glazing, which affects energy efficiency through its U-value (thermal transmittance) and SHGC (Solar Heat Gain Coefficient), the EDGE Certification Protocol provides clear requirements: “At the post-construction stage, the Client must provide manufacturer’s data sheets for the window glazing measure, showing the make and model, U-value, and SHGC of the installed glass, to confirm that the glazing matches the specifications claimed in the self- assessment and meets the energy efficiency requirements” (EDGE Certification Protocol, Section 3.4: Post- Construction Requirements). Option C, manufacturer’s data sheets showing the make and model, U-value, and SHGC of the installed glass, directly matches this requirement, as it provides the specific technical data needed to verify compliance. Option A (design building elevations marking the window glass specifications) is relevant at the design stage, not post-construction: “Design elevations are required at the preliminary stage to show intended glazing specifications, not after construction” (EDGE Certification Protocol, Section 3.2:
Audit Requirements). Option B (bill of quantities with specifications highlighted) is insufficient on its own, as it may not provide detailed technical data: “Bills of quantities may support purchase verification, but manufacturer’s data sheets are required for technical specifications like U-value and SHGC” (EDGE Certification Protocol, Section 3.4: Post-Construction Requirements). Option D (window schedule showing major glass types) is helpful but not sufficient, as it lacks the detailed technical data: “Window schedules may indicate glass types, but they do not replace the need for manufacturer’s data sheets with U-value and SHGC at post-construction” (EDGE User Guide, Section 6.2: Documentation Requirements). The EDGE User Guide further clarifies: “For glazing measures, post-construction evidence must confirm the installed product’s performance through manufacturer’s data sheets, ensuring alignment with the design-stage claims” (EDGE User Guide, Section 4.1: Insulation Measures). Thus, manufacturer’s data sheets (Option C) are required at the post-construction stage.
Reference:EDGE Certification Protocol, Section 3.4: Post-Construction Requirements, Section 3.2: Audit Requirements; EDGE User Guide Version 2.1, Section 6.2: Documentation Requirements, Section 4.1:
Insulation Measures.

질문 31
In EDGE software, occupancy sensors are used for controlling:

Lighting.

Water taps.

Air conditioners.

External lighting.

Occupancy sensors in the EDGE software are part of energy efficiency measures aimed at reducing unnecessary energy use by automating system operation based on occupant presence. The EDGE User Guide explicitly defines their application: “Occupancy sensors in EDGE are used for controlling lighting in internal areas, automatically turning lights off when spaces are unoccupied to reduce energy consumption. This measure, often listed as EEM23 – Occupancy Sensors for Lighting, can achieve significant savings in buildings with intermittent occupancy, such as offices or schools” (EDGE User Guide, Section 4.4: Lighting Efficiency Measures). Option A, lighting, directly matches this description, as occupancy sensors are primarily associated with lighting control in EDGE. Option B (water taps) is incorrect, as occupancy sensors are not used for water systems in EDGE: “Water taps may be controlled by sensors in some projects, but this is not a recognized measure in EDGE, which focuses on measures like low-flow fixtures for water savings” (EDGE User Guide, Section 5.2: Water Efficiency Measures). Option C (air conditioners) is also incorrect, as occupancy sensors for HVAC are not a standard measure in EDGE: “While occupancy sensors can theoretically control air conditioners, EDGE does not include this as a measure; HVACefficiency is addressed through measures like variable speed drives or efficient chillers” (EDGE Methodology Report Version 2.0, Section 5.1: Energy Efficiency Metrics). Option D (external lighting) is not applicable, as EDGE specifies occupancy sensors for internal areas: “Occupancy sensors in EDGE are applied to internal lighting, not external lighting, which may use timers or photocells instead” (EDGE User Guide, Section 4.4: Lighting Efficiency Measures). The EDGE Methodology Report further confirms: “The energy savings from occupancy sensors in EDGE are calculated based on reduced lighting hours in internal spaces, reflecting typical usage patterns in commercial buildings” (EDGE Methodology Report Version 2.0, Section 5.4:
Lighting Calculations). Thus, occupancy sensors are used for controlling lighting (Option A).
Reference:EDGE User Guide Version 2.1, Section 4.4: Lighting Efficiency Measures, Section 5.2: Water Efficiency Measures; EDGE Methodology Report Version 2.0, Section 5.1: Energy Efficiency Metrics, Section 5.4: Lighting Calculations.

질문 32
Water consumption savings, resulting from greywater recovery, are based on which of the following?

Base case water consumption

Improved case water consumption

Cost of water consumption at local tariff

Incremental cost of installation and cost of water consumption at local tariff

질문 33
For which of the following is EDGE Advanced certification available?

New constructions

Green lease agreements

Infrastructure constructions

Parks and landscape projects

카테고리 EDGE

2026 Updated Verified EDGE-Expert Q&As – Pass Guarantee or Full Refund [Q10-Q33]