200-301 - Latest Training Dumps

200-301 Training & Certification Get Latest CCNA Updated on Feb 22, 2026

Certification Training for 200-301 Exam Dumps Test Engine

Earning the Cisco 200-301 certification can open up many career opportunities for IT professionals. It is recognized globally and is highly valued by employers. With this certification, candidates can apply for job roles such as network administrator, network engineer, and network specialist. They can also advance their careers by pursuing higher-level certifications, such as the Cisco Certified Network Professional (CCNP) or the Cisco Certified Internetwork Expert (CCIE).

Q780. 请参阅展品。

Which switch becomes the root bridge?

Q781. Drag and drop the common functions from the left onto the cofresponding network topology architecture layer on the right. Not all common functions are used.

解释：

Q782. Which type of wireless encryption is used for WPA2 in preshared key mode?

AES-128

RC4

AES-256

TKIP with RC4

We can see in this picture we have to type 64 hexadecimal characters (256 bit) for the WPA2 passphrase so we can deduce the encryption is AES-256, not AES-128.

https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/67134-wpa2-config.html

Q783. Drag and drop the TCP or UDP details from the left onto their corresponding protocols on the right.

Q784. Drag and drop the TCP/IP protocols from the left onto the transmission protocols on the right

解释：

Q785. 请参阅展品。

An engineer is bringing up a new circuit to the MPLS provider on the Gi0/1 interface of Router1 The new circuit uses eBGP and teams the route to VLAN25 from the BGP path What s the expected behavior for the traffic flow for route 10.10.13.0/25?

Traffic to 10.10.13.0.25 is load balanced out of multiple interfaces

Route 10.10.13.0/25 is updated in the routing table as being learned from interface Gi0/1.

Traffic to 10.10.13.0/25 is asymmeteical

Route 10.10.13.0/25 learned via the GiO/0 interface remains in the routing table

Q786. What is a function of an endpoint on a network?

forwards traffic between VLANs on a network

connects server and client devices to a network

allows users to record data and transmit to a file server

provides wireless services to users in a building

An endpoint is a remote computing device that communicates back and forth with a network to which it is connected. Examples of endpoints include:
– Desktops
– Laptops
– Smartphones
– Tablets
– Servers
– Workstations
– Internet-of-things (IoT) devices

Q787. Which command can you enter to create a NAT pool of 6 addresses?

Router (config)#ip nat pool test 175.17.12.69 175.17.12.74 prefix-length 24

Router (config)#ip nat pool test 175.17.12.69 175.17.13.74 prefix-length 16

Router (config)#ip nat pool test 175.17.12.66 175.17.12.72 prefix-length 8

Router (config)#ip nat pool test 175.17.12.69 175.17.12.76 prefix-length 8

Q788. What must be considered before deploying virtual machines?

location of the virtual machines within the data center environment

whether to leverage VSM to map multiple virtual processors to two or more virtual machines

resource limitations, such as the number of CPU cores and the amount of memory

support for physical peripherals, such as monitors, keyboards, and mice

Q789. What role does a hypervisor provide for each virtual machine in server virtualization?

infrastructure-as-a-service

Software-as-a-service

control and distribution of physical resources

services as a hardware controller

Section: Automation and Programmability

Q790. Refer to the exhibit. A multivendor network exists and the company is implementing VoIP over the network for the first time.

Q791. 请参阅展品。

Drag and drop the networking parameters from the left onto the correct values on the right.

NIC vendor OUI -> 00:0C:22
NIC MAC address -> 00:0C:22:83:79:A3
default gateway -> 192.168.1.193
host IP address -> 192.168.1.200
subnet mask -> 255.255.255.192
The “ip route” and “ip addr show eth1” are Linux commands.
+ “ip route”: display the routing table
+ “ip addr show eth1”: get depth information (only on eth1 interface) about your network interfaces like IP Address, MAC Address information

Q792. 请参阅展品。

A static route must be configured on R14 to forward traffic for the 172 21 34 0/25 network that resides on R86 Which command must be used to fulfill the request?

ip route 172.21.34.0 255.255.255.192 10.73.65.65

ip route 172.21.34.0 255.255.255.0 10.73.65.65

ip route 172.21.34.0 255.255.128.0 10.73.65.64

ip route 172.21.34.0 255.255.255.128 10.73.65.66

Q793. In what way does a network supervisor reduce maintenance costs while maintaining network integrity on a traditionally managed network?

They install an automated network-monitoring system to provide early warning of network issues.

They employ additional network administrators to proactively manage the network.

They use automation to centralize network-management tasks.

They automate change-management processes that verify issue resolution.

Q794. Which two pieces of information can you learn by viewing the routing table? (Choose two.)

whether an ACL was applied inbound or outbound to an interface

the EIGRP or BGP autonomous system

whether the administrative distance was manually or dynamically configured

which neighbor adjacencies are established

the length of time that a route has been known

Section: IP Connectivity

Q795. 请参阅展品。

What is the issue with the interface GigabitEthernet0/0/1?

Port security

High throughput

Cable disconnect

duplex mismatch

Q796. Which port type does a lightweight AP use to connect to the wired network when it is configured in local mode?

LAG

EtherChannel

trunk

access

Q797. What must be considered when using 802.11a?

It is chosen over 802.11b when a lower-cost solution is necessary

It is susceptible to interference from 2.4 GHz devices such as microwave ovens

It is compatible with 802.11b- and 802 11g-compliant wireless devices

It is used in place of 802.11b/g when many nonoverlapping channels are required

Q798. Drag and drop the WLAN components from the left onto the correct descriptions on the right.

Q799. 请参阅展品。

Which password must an engineer use to enter the enable mode?

adminadmin123

默认

testing 1234

cisco123

Q800. Refer to the exhibit. Which switch in this configuration will be elected as the root bridge?

SW1

SW2

SW3

SW4

The lowest MAC address will determine which bridge becomes the root bridge. In this case SW3 in decimal is 12.15.21.26.60.157 which is the lowest MAC address.

Q801. 请参阅展品。

Router R1 is running three different routing protocols. Which route characteristic is used by the router to forward the packet that it receives for destination IP 172.16.32.1?

longest prefix

metric

cost

administrative distance

加载中 …

Step by Step Guide to Prepare for 200-301 Exam: https://www.trainingdump.com/Cisco/200-301-practice-exam-dumps.html

类别 200-301

200-301 Training & Certification Get Latest CCNA Updated on Feb 22, 2026 [Q780-Q801]